IP66 Weatherproof MIFARE Access Control Reader with RS-485 / Wiegand Output
SKU LM-RD1CW
- Fast shipping from four branches
- 30-day returns on unopened products
The Luminys RD1CW is an IP66-rated MIFARE card reader designed for outdoor door installations where a compact, weather-sealed reader is required. Reads 13.56 MHz IC cards and outputs to access panels over RS-485 or Wiegand.
Weatherproof, panel-agnostic
The IP66 rating covers dust ingress and heavy rain, appropriate for exterior doors, gates, and gate posts. Dual output (RS-485 and Wiegand) lets the reader drop into most existing panel systems without a bridge. LED indicator and buzzer give installers and end users clear feedback at the door.
Key features
- MIFARE IC cards at 13.56 MHz, 0 to 2 in read distance, 0.1 s response
- IP66 outdoor rating for exterior door and gate installations
- RS-485 and Wiegand outputs for panel integration
- Tamper alarm event supported
- LED indicator + buzzer for user feedback
- 86 case or surface mount installation
- NDAA compliant, FCC/FCC ID, IC/IC ID
Specifications
| SKU | LM-RD1CW |
|---|---|
| Brand | Luminys |
| Form factor | Weatherproof surface-mount card reader |
| Verification method | Card |
| Card type | MIFARE IC card, 13.56 MHz |
| Card read distance | 0 in to 2.0 in (0.0 cm to 5.0 cm) |
| Response time | 0.1 s |
| Max transmission power | 42 dBm at 10 m |
| Interfaces | 1 x RS-485, 1 x Wiegand output |
| Alarm events | Tamper |
| Power supply | 12 VDC, 0.5 A |
| Power consumption | Standby ≤0.9W, Working ≤1.7W |
| Operating temp | -22°F to 158°F (-30°C to 70°C) |
| Operating humidity | 5% to 95% RH, non-condensing |
| Protection rating | IP66 |
| Casing material | PC and acrylic |
| Installation | 86 case mount or surface mount |
| Dimensions | 5.3" x 1.6" x 0.6" (135 x 40 x 15 mm) |
| Weight | 0.8 lb (0.4 kg) gross |
| Certifications | NDAA, FCC/FCC ID, IC/IC ID |
Documents and resources
FAQs
Can the RD1CW be installed outdoors?
Yes. IP66 protection covers dust and heavy rain, appropriate for exterior door and gate installations.
What credential types does the RD1CW support?
MIFARE (IC) cards at 13.56 MHz. Card only, no Bluetooth or PIN.
Does it integrate with existing access control panels?
Yes. Both RS-485 and Wiegand outputs are provided for panel integration.
Is there tamper detection?
Yes. The reader reports a tamper alarm event.
Is the RD1CW NDAA compliant?
Yes. NDAA compliant with FCC/FCC ID and IC/IC ID certifications.
