10-Port Gigabit Desktop PoE+ Switch with 8 PoE+ Ports, 63 W, 1 SFP Slot, Unmanaged
TP-Link

10-Port Gigabit Desktop PoE+ Switch with 8 PoE+ Ports, 63 W, 1 SFP Slot, Unmanaged

SKU TPL-TL-SG1210P Model TL-SG1210P

  • Eight 802.3af/at PoE+ ports sharing a 63 W budget, plus a Gigabit RJ45 and SFP slot
  • Extend mode runs PoE and data to 250 m on ports 1 to 4 for long camera runs
  • PoE Auto Recovery restarts a frozen camera or AP on ports 1 to 8
  • Unmanaged and fanless, so it is plug and play with nothing to configure
New to SS&Si? Apply for a dealer account
Share
  • Fast shipping from four branches
  • 30-day returns on unopened products
Questions? Call us 866-364-0030The SS&Si dealer team

Product highlights

  • Ports9 x Gigabit RJ45, 1 x SFP
  • PoE8 ports, 63 W, 802.3af/at
  • RangeExtend mode to 250 m
  • Size8.2 x 5.0 x 1.0 in, fanless

The TL-SG1210P is an unmanaged 10-port Gigabit desktop switch with eight PoE+ ports and an SFP slot, built for small jobs that need a few cameras or APs powered with no configuration. Plug it in and it works, with no fan to fail.

Built for small camera and Wi-Fi jobs

Ports 1 to 8 deliver 802.3af/at PoE+ from a 63 W budget, and one extra RJ45 port and one SFP slot handle the uplink or a non-PoE device. Extend mode on ports 1 to 4 reaches 250 m, priority mode protects ports 1 and 2, and isolation mode separates ports 1 to 4 from 5 to 8. PoE Auto Recovery covers ports 1 to 8, and the steel case has a physical security lock slot.

Key features

  • 8 PoE+ ports, 63 W total: 802.3af/at for cameras, APs and IP phones; budget the load, since 63 W is shared
  • Extend mode to 250 m: on ports 1 to 4 for long camera runs
  • One SFP slot: for a Gigabit fiber uplink
  • PoE Auto Recovery: restarts a frozen PoE device on ports 1 to 8
  • Plug and play: unmanaged, fanless, nothing to configure

System requirements

None. Uses the included 53.5V DC external power adapter. Powered devices must be 802.3af or 802.3at compliant.

Specifications

SKUTPL-TL-SG1210P
BrandTP-Link
Form factor10-port Gigabit unmanaged desktop PoE+ switch
CommunicationEthernet / IP
Power inputExternal adapter, 53.5V DC / 1.31A (included)
Power consumption77.24 W max at 220V with 63 W of PoE load
ManagementUnmanaged
PoE802.3af PoE
PoE802.3at PoE+
Port speedGigabit
Ethernet ports9 x Gigabit RJ45 (ports 1-8 PoE+)
SFP slots1 x Gigabit SFP
PoE budget63 W total
PoE featuresExtend mode to 250 m on ports 1-4, priority mode on ports 1-2, isolation mode, PoE Auto Recovery on ports 1-8
Switching capacity20 Gbps
Packet forwarding rate14.88 Mpps
MAC address table4K
Jumbo frame16 KB
Communication notes802.3x flow control, 802.1p/DSCP QoS, IGMP snooping
CoolingFanless
MountingDesktop
Dimensions8.2 x 5.0 x 1.0 in (209 x 126 x 26 mm)
Operating temp32°F to 104°F (0°C to 40°C)
Operating humidity10 to 90% RH, non-condensing
ComplianceFCC, CE
Package contentsTL-SG1210P, power adapter, installation guide

FAQs

How many PoE devices can the TL-SG1210P power?
Ports 1 to 8 are PoE+, sharing a 63 W budget. Check each device's max draw, since eight full PoE+ loads would exceed it.
Can it reach a camera more than 100 m away?
Yes. Extend mode on ports 1 to 4 carries PoE and data up to 250 m.
Does this switch need to be configured?
No. It is unmanaged and works out of the box, with no web interface or VLAN support.
What is the SFP slot for?
It is a Gigabit SFP slot for a fiber uplink, in addition to the ninth RJ45 port.
All PoE Switches