16-Port Gigabit Desktop PoE+ Switch with 16 PoE+ Ports, 120 W, Unmanaged
TP-Link

16-Port Gigabit Desktop PoE+ Switch with 16 PoE+ Ports, 120 W, Unmanaged

SKU TPL-TL-SG116P Model TL-SG116P

  • 16 Gigabit ports, every one 802.3af/at PoE+ from a 120 W shared budget
  • Extend mode carries PoE and data to 250 m on ports 1 to 4 for long camera runs
  • Priority, isolation and PoE Auto Recovery without any configuration
  • Unmanaged and fanless, so it is plug and play with nothing to configure
New to SS&Si? Apply for a dealer account
Share
  • Fast shipping from four branches
  • 30-day returns on unopened products
Questions? Call us 866-364-0030The SS&Si dealer team

Product highlights

  • Ports16 x Gigabit, all PoE+
  • PoE120 W, 802.3af/at
  • RangeExtend mode to 250 m
  • Size11.3 x 4.4 x 1.0 in, fanless

The TL-SG116P is an unmanaged 16-port Gigabit desktop switch with PoE+ on every port, a straightforward way to power a small camera, access point and phone install from one unit with nothing to configure. It runs fanless, so it stays quiet in an office or a shared closet.

Built for small camera and access point jobs

All 16 RJ45 ports deliver 802.3af/at PoE from a 120 W shared budget. Extend mode on ports 1 to 4 pushes PoE and data out to 250 m for a camera past the normal 100 m limit, priority mode on ports 1 to 4 protects critical devices, and isolation mode keeps port groups from talking to each other. PoE Auto Recovery restarts a powered device that stops responding.

Key features

  • 16 PoE+ ports, 120 W total: 802.3af/at on every RJ45 port for cameras, APs and IP phones
  • Extend mode to 250 m: on ports 1 to 4 for camera runs past 100 m
  • Priority and isolation modes: button-selectable, no software needed
  • PoE Auto Recovery: restarts a frozen PoE device without a truck roll
  • Fanless steel case: silent on a desk or shelf, with plug and play setup

System requirements

None. Uses the included 53.5V DC external power adapter. Powered devices must be 802.3af or 802.3at compliant.

Specifications

SKUTPL-TL-SG116P
BrandTP-Link
Form factor16-port Gigabit unmanaged desktop PoE+ switch
CommunicationEthernet / IP
Power inputExternal adapter, 53.5V DC / 2.43A (included)
Power consumption144.28 W max at 110V with 120 W of PoE load
ManagementUnmanaged
PoE802.3af PoE
PoE802.3at PoE+
Port speedGigabit
Ethernet ports16 x Gigabit RJ45 PoE+
PoE budget120 W total
PoE featuresExtend mode to 250 m on ports 1-4, priority mode on ports 1-4, isolation mode, PoE Auto Recovery on ports 1-16
Switching capacity32 Gbps
Packet forwarding rate23.8 Mpps
MAC address table8K
Communication notes802.3x flow control, 802.1p/DSCP QoS, IGMP snooping, auto MDI/MDIX
CoolingFanless
MountingDesktop
Dimensions11.3 x 4.4 x 1.0 in (286 x 111.7 x 25.4 mm)
Operating temp32°F to 104°F (0°C to 40°C)
Operating humidity10 to 90% RH, non-condensing
ComplianceFCC, CE
Package contentsTL-SG116P, power adapter, installation guide

FAQs

How many PoE devices can the TL-SG116P power?
All 16 ports are PoE+, sharing a 120 W budget. Divide 120 W by each device's max draw to size the job.
Can it reach a camera more than 100 m away?
Yes. Extend mode on ports 1 to 4 carries PoE and data up to 250 m.
Does it need configuration or a controller?
No. It is unmanaged and works out of the box, with no web interface or VLAN support. Modes are set with buttons.
Is the TL-SG116P loud?
No. It is fanless, so it is silent on a desk or shelf.
All PoE Switches