TP-Link

Omada 5 GHz 300 Mbps Long-Range Indoor/Outdoor Wireless Bridge KIT, 5 km PtP/PtMP, IP65, 14 dBi

SKU TPL-EAP115-Bridge KIT Model EAP115-Bridge KIT

  • 5 GHz 300 Mbps bridge KIT for links up to 5 km (3.1 mi) with 14 dBi antennas
  • Auto-pairing with a role DIP switch, up to 1:4 multi-bridge connections
  • Three 10/100 ports, powers from 12V DC, 802.3af PoE or 24V passive PoE
  • IP65 enclosure rated -40°F to 158°F, managed standalone or through Omada SDN
  • Fast shipping from four branches
  • 30-day returns on unopened products

Product highlights

  • RangeUp to 5 km (3.1 mi)
  • Connectivity5 GHz, up to 300 Mbps
  • Ports3 x 10/100 RJ45
  • PoE802.3af, passive PoE or 12V DC
  • Weather ratingIP65

The Omada EAP115-Bridge KIT is a 5 GHz 300 Mbps wireless bridge KIT for linking remote cameras and devices back to the network at up to 5 km (3.1 mi). It targets surveillance extensions where trenching is the expensive part of the job.

Built for camera and device extensions

Omada SmartBridging pairs the bridges without a login: set the role with the DIP switch, and the main AP and client connect through auto-pairing. A main bridge supports up to 1:4 multi-bridge connections for point-to-multipoint jobs, and auto-pairing needs firmware v1.1.2 or later. Each unit has three 10/100 Ethernet ports and a 14 dBi internal antenna with a 35° horizontal beamwidth, and runs from 12V DC, 802.3af PoE or 24V passive PoE. The included passive PoE adapter is for dry indoor use only.

Key features

  • Up to 5 km (3.1 mi): 5 GHz PtP link at up to 300 Mbps
  • Auto-pairing: role DIP switch and a pair button, no login needed, up to 1:4 multi-bridge connections
  • Three power options: 12V DC (solar-compatible), 802.3af PoE or 24V passive PoE
  • Three 10/100 ports: connect more than one camera or device at the remote end
  • IP65, -40°F to 158°F: weatherproof enclosure with ±6 kV common-mode lightning protection, pole mounting accessories included
  • Omada SDN ready: zero-touch provisioning, Omada app and centralized management

System requirements

Cloud access and centralized management need an Omada controller: Omada Central (cloud-based), hardware or Software Controller. TP-Link notes that non-Omada devices on the wired LAN ports are not recognized by the controller; connect them through an Omada switch to see their status. Rates are physical-layer maximums from the 802.11 specification; actual throughput and range vary with the environment.

Specifications

SKUTPL-EAP115-Bridge KIT
BrandTP-Link
Form factor5 GHz 300 Mbps indoor/outdoor wireless bridge KIT
CommunicationEthernet / IP
Power input12V DC (12V ±10%), 802.3af PoE or 24V passive PoE; passive PoE adapter included (dry indoor use only)
Power consumption6.0 W max
Wi-Fi standardWi-Fi 4
PoE802.3af PoE
PoEPassive PoE
Port speedFast Ethernet
Works withOmada
Ethernet ports3 x 10/100 Mbps Ethernet
Wireless standardsIEEE 802.11a/n on 5 GHz
Wireless speedUp to 300 Mbps on 5 GHz
Transmission distance5 km (3.1 mi)
AntennasInternal 2x2 dual-polarized directional MIMO, 14.0 dBi on 5 GHz
Antenna beamwidthHorizontal 35°
Weather ratingIP65
SSIDs6
Wireless securityVLAN, rogue AP detection, up to 4,000 MAC filter entries, wireless encryption
Controller managementOmada Central (cloud-based), Omada hardware controller or Omada Software Controller; Omada app
Communication notesPtP and PtMP (up to 1:4 multi-bridge connections); zero-touch provisioning; role DIP switch
MountingPole and wall mounting (pole accessories included)
Dimensions3.1 x 2.4 x 10.9 in (79 x 60 x 276 mm)
Operating temp-40°F to 158°F (-40°C to 70°C)
Operating humidity10 to 90% RH, non-condensing
ComplianceCE, FCC
Package contentsEAP115-Bridge KIT, installation guide, mounting kit, passive PoE adapter

FAQs

How far does the EAP115-Bridge KIT reach?
TP-Link lists 5 km (3.1 mi) at up to 300 Mbps on 5 GHz. Real range depends on line of sight and the environment.
How can it be powered?
12V DC, 802.3af PoE or 24V passive PoE. The included passive PoE adapter is for dry indoor use only.
Can one main bridge serve several clients?
Yes, up to 1:4 multi-bridge connections. TP-Link notes auto-pairing needs firmware v1.1.2 or later.
Do I need an Omada controller?
Not to pair the bridges. Cloud access and centralized management need an Omada Cloud-Based, hardware or Software Controller.
Is it an 802.11ac bridge?
No. It is an 802.11a/n 5 GHz bridge at up to 300 Mbps. The EAP211 and EAP215 KITs are the 867 Mbps 802.11ac versions.