TP-Link

Omada AC1350 Ceiling Mount Dual-Band Wi-Fi 5 Access Point with Gigabit Port, MU-MIMO and PoE

SKU TPL-EAP225 Model EAP225

  • AC1350 dual-band Wi-Fi 5 with MU-MIMO, 867 Mbps on 5 GHz and 450 Mbps on 2.4 GHz
  • Powers from 802.3af/at PoE or 24V passive PoE, with a passive PoE adapter in the box
  • Ceiling and wall mounting kits included, plus a physical security lock
  • Managed in Omada with the Cloud-Based, hardware or Software Controller or the Omada app
  • Fast shipping from four branches
  • 30-day returns on unopened products

Product highlights

  • ConnectivityAC1350 Wi-Fi 5, MU-MIMO
  • Ports1 x Gigabit RJ45
  • PoE802.3af/at or passive PoE
  • MountCeiling or wall, kits included

The Omada EAP225 is an AC1350 Wi-Fi 5 ceiling access point for offices, shops and rental properties where a dependable Gigabit AP at a low cost per door is the goal. It runs off 802.3af/at PoE or the passive PoE adapter in the box, so it goes in even when the switch is not PoE.

Built for the budget-conscious installer

Dual-band Wi-Fi 5 with MU-MIMO delivers up to 867 Mbps on 5 GHz and 450 Mbps on 2.4 GHz through three internal antennas. Ceiling and wall mounting kits come in the box, and the unit adopts into an Omada site so channel, power and SSID settings are pushed from the controller instead of set AP by AP.

Key features

  • Wi-Fi 5 with MU-MIMO: 867 Mbps on 5 GHz and 450 Mbps on 2.4 GHz, with band steering and beamforming
  • Flexible power: 802.3af/at PoE or 24V passive PoE, adapter included
  • Mounting kits included: ceiling and wall, plus a physical security lock
  • Omada management: Cloud-Based, hardware or Software Controller, or the Omada app
  • Up to 16 SSIDs: VLAN-mapped staff, guest and IoT networks with captive portal through the controller

System requirements

Mesh, seamless roaming, captive portal and zero-touch provisioning require an Omada controller: the Omada Cloud-Based Controller, an Omada Hardware Controller (OC200 or OC300) or the Omada Software Controller. Zero-touch provisioning is not supported on hardware version V3.20.

Specifications

SKUTPL-EAP225
BrandTP-Link
Form factorCeiling-mount dual-band Wi-Fi 5 access point
CommunicationEthernet / IP
Power input802.3af/at PoE or 24V passive PoE (PoE adapter included)
Power consumption12.6 W max (US); 10.5 W max (EU)
Wi-Fi standardWi-Fi 5
PoE802.3af PoE
PoE802.3at PoE+
PoEPassive PoE
Port speedGigabit
Works withOmada
Ethernet ports1 x Gigabit RJ45
Wireless standardsIEEE 802.11ac/n/g/b/a
Wireless speedUp to 867 Mbps on 5 GHz, up to 450 Mbps on 2.4 GHz
Antennas3 internal omni: 4 dBi (2.4 GHz), 5 dBi (5 GHz)
SSIDsUp to 16 (8 per band)
Wireless securityCaptive portal, 802.1X, wireless MAC filtering, client isolation, SSID to VLAN mapping, rogue AP detection
Controller managementOmada Cloud-Based Controller, Omada Hardware Controller (OC200, OC300) or Omada Software Controller; Omada app
Communication notesSNMP v1/v2c, SSH, HTTP/HTTPS, local/remote syslog, L3 and multi-site management, management VLAN; zero-touch provisioning needs the Cloud-Based Controller (not supported on V3.20)
MountingCeiling or wall (kits included)
Dimensions8.1 x 7.1 x 1.5 in (205.5 x 181.5 x 37.1 mm)
Operating temp32°F to 104°F (0°C to 40°C)
Operating humidity10 to 90% RH, non-condensing
ComplianceCE, FCC
Package contentsEAP225, passive PoE adapter, power cord, mounting kits, installation guide

Documents and resources

FAQs

Does the EAP225 need a PoE switch?
No. It powers from an 802.3af/at PoE switch, or from 24V passive PoE using the passive PoE adapter included in the box.
Do I need an Omada controller to run the EAP225?
It can run standalone, but captive portal, mesh, roaming and zero-touch provisioning need an Omada controller or the Omada Cloud-Based Controller.
Does the EAP225 support zero-touch provisioning?
Yes through the Omada Cloud-Based Controller on V3.0, V4.0 and above. TP-Link states it is not supported on V3.20.
What mounting hardware comes with it?
Ceiling and wall mounting kits are included. The unit also has a physical security lock.
Is it Wi-Fi 6?
No. The EAP225 is Wi-Fi 5 (802.11ac) with MU-MIMO, up to 867 Mbps on 5 GHz and 450 Mbps on 2.4 GHz.