Omada Gigabit RJ45 to 1000BASE-LX Single-Mode SC Fiber Media Converter, 1310 nm, 20 km
SKU TPL-MC210CS Model MC210CS
- Converts Gigabit copper to 1000BASE-LX single-mode SC fiber at 1310 nm
- Extends a Gigabit link up to 20 km over single-mode fiber, 100 m on the copper side
- Auto MDI/MDIX 10/100/1000 RJ45 port with duplex auto-negotiation
- Fits an MC1400 chassis or runs standalone on its power adapter
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- RangeUp to 20 km
- Connectivity1000BASE-LX, 1310 nm, SC
- MountDesktop or MC1400 chassis
- PowerExternal adapter, 1.8 W max
The Omada MC210CS converts a Gigabit copper port to 1000BASE-LX single-mode fiber for runs up to 20 km. Use it for campus links, remote buildings and long camera backhauls where multi-mode will not reach.
Built for long single-mode links
The fiber side is SC over single-mode at 1310 nm; the RJ45 side is 10/100/1000 with auto MDI/MDIX. It negotiates half or full duplex and supports IEEE 802.3x flow control. Run it standalone on its power adapter or slide it into an MC1400 chassis.
Key features
- Up to 20 km on single-mode fiber at 1310 nm
- Gigabit on both sides: 10/100/1000 RJ45 to 1000BASE-LX fiber
- Auto MDI/MDIX on the copper port
- PWR and Link/Act LEDs for field checks
- Fits the MC1400 chassis to keep converters in one rack
System requirements
A Gigabit Ethernet device on the copper side, single-mode fiber with SC connectors, and a matching 1000BASE-LX converter or module at the far end. Power adapter and installation guide are in the box.
Specifications
| SKU | TPL-MC210CS |
|---|---|
| Brand | TP-Link |
| Form factor | Gigabit media converter, standalone or MC1400 chassis |
| Communication | Ethernet / IP |
| Power input | External power adapter |
| Power consumption | 1.8 W max |
| Port speed | Gigabit |
| Standard | 1000BASE-LX (IEEE 802.3z), 1000BASE-T (IEEE 802.3ab) |
| Connector type | SC/UPC (fiber), RJ45 (copper, auto MDI/MDIX) |
| Fiber type | Single-mode |
| Wavelength | 1310 nm |
| Max distance | 20 km (fiber), 100 m (copper) |
| Interface | 2x 1000M SC/UPC ports, 1x 10/100/1000M RJ45 port |
| Compatibility notes | Fits the MC1400 14-slot chassis |
| LEDs | PWR, Link/Act |
| Dimensions | 3.7 x 2.9 x 1.1 in (94.5 x 73.0 x 27.0 mm) |
| Operating temp | 32°F to 122°F (0°C to 50°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE, RoHS |
| Package contents | MC210CS, power adapter, installation guide |
Documents and resources
FAQs
How far can the MC210CS run?
Up to 20 km over single-mode fiber at 1310 nm. The copper side is limited to 100 m.
Does it work with multimode fiber?
No. It is a 1000BASE-LX single-mode converter. Multi-mode runs need the MC200CM.
Can it go in a rack?
Yes. It fits the MC1400 14-slot chassis, or runs standalone on its power adapter.
What connectors does it use?
SC on the fiber side and an RJ45 port with auto MDI/MDIX on the copper side.
