Omada 10/100 Mbps RJ45 to 100 Mbps Multi-Mode SC Fiber Media Converter, 1310 nm, 2 km
SKU TPL-MC100CM Model MC100CM
- Converts 10/100 Mbps copper to 100 Mbps multi-mode SC fiber at 1310 nm
- Extends a link up to 2 km on 62.5/125 µm or 50/125 µm multi-mode fiber
- Auto MDI/MDIX on the RJ45 port, half and full duplex negotiation
- Fits the MC1400 chassis, with the power adapter included in the box
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- RangeUp to 2 km
- Connectivity10/100 RJ45 to SC multi-mode
- Ports1x RJ45, 2x SC/UPC
- Power9V/0.6A adapter
The Omada MC100CM converts a 10/100 Mbps copper RJ45 link to 100 Mbps multi-mode fiber, extending a run up to 2 km. It is the quick fix for getting an IP camera or a remote switch back to the head end when the copper would go past 100 m.
Built for short fiber hops
It has two SC/UPC fiber ports and one 10/100 Mbps RJ45 port with auto MDI/MDIX, and runs at 1310 nm over 62.5/125 µm or 50/125 µm multi-mode fiber. Auto-negotiation of half and full duplex and IEEE 802.3x flow control are supported. Status LEDs show power, fiber link and copper link at a glance, and the unit fits the MC1400 chassis.
Key features
- Up to 2 km over multi-mode fiber at 100 Mbps
- Auto MDI/MDIX on the 10/100 Mbps RJ45 port, no crossover cable
- Auto-negotiation: half and full duplex, with full-duplex flow control
- LED indicators: PWR, FX link/activity and TP link/activity
- MC1400 chassis compatible per TP-Link's datasheet
System requirements
A matching multi-mode fiber converter or 100BASE-FX port at the far end, 62.5/125 µm or 50/125 µm multi-mode fiber with SC connectors, and Cat 5 or better UTP up to 328 ft (100 m) on the copper side. A power adapter is included.
Specifications
| SKU | TPL-MC100CM |
|---|---|
| Brand | TP-Link |
| Form factor | Desktop media converter |
| Communication | Ethernet / IP |
| Power input | 9V/0.6A power adapter |
| Power consumption | 1.19W max. |
| Port speed | Fast Ethernet |
| Standard | IEEE 802.3i, IEEE 802.3u |
| Ethernet ports | 1× 10/100 Mbps RJ45 (auto MDI/MDIX) |
| Fiber ports | 2× 100 Mbps SC/UPC |
| Fiber type | 62.5/125 µm or 50/125 µm multi-mode |
| Wavelength | 1310 nm |
| Max distance | 2 km |
| Copper cabling | 10BASE-T: Cat 3 or above UTP/STP, up to 328 ft (100 m); 100BASE-TX: Cat 5 or above, up to 328 ft (100 m) |
| Hardware features | Auto-negotiation of half and full duplex; IEEE 802.3x flow control; half-duplex backpressure |
| LEDs | PWR, FX Link/Act, TP Link/Act |
| Mounting | Fits MC1400 chassis |
| Dimensions | 3.7 x 2.9 x 1.1 in (94.5 x 73.0 x 27.0 mm) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE, RoHS |
| Package contents | MC100CM, power adapter, installation guide |
