Omada 28-Port Gigabit L2+ Managed PoE+ Switch, 24 PoE+ Ports, 384 W, 4 x 10G SFP+ Slots
SKU TPL-SG3428XMP Model SG3428XMP
- 24 Gigabit PoE+ ports with a 384 W budget and up to 30 W per port
- 4 10G SFP+ slots for uplinks to the core or another building
- L2+ static routing, VLANs, ACLs, 802.1X and ERPS ring recovery
- Managed in Omada with zero-touch provisioning, or standalone by web UI and CLI
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports24 x Gigabit PoE+, 4 x 10G SFP+
- PoE384 W, 30 W per port
- ConnectivityL2+ managed, cloud or standalone
- Mount19-inch rack
- Size17.3 x 13.0 x 1.7 in
The Omada SG3428XMP is a 28-port Gigabit L2+ managed switch with 24 PoE+ ports, a 384 W PoE budget and four 10G SFP+ slots, sized for a closet full of cameras, access points and phones with 10G uplinks to match. It manages in the same Omada site as the gateway and APs.
Built for camera and wireless deployments
Every RJ45 port is 802.3af/at PoE+ at up to 30 W. Perpetual PoE keeps cameras powered through a switch reboot and Fast PoE brings them up before the switch finishes booting. 128 Gbps of switching capacity and 10G SFP+ uplinks keep a full PoE load from bottlenecking. Static routing, 802.1Q VLANs, ACLs, 802.1X and IGMP snooping cover segmented camera, voice and guest networks, and the switch mounts in a 19-inch rack.
Key features
- 384 W across 24 PoE+ ports: up to 30 W per port for PTZs, APs and phones
- Perpetual and Fast PoE: devices stay powered through a switch reboot and power up early on a cold start
- Four 10G SFP+ slots for uplinks to the core or between buildings
- L2+ features: static routing, DHCP server, VLANs, ACLs and ERPS ring recovery
- Zero-touch provisioning and batch firmware upgrades through the Omada Cloud-Based Controller
System requirements
Centralized management needs an an Omada Cloud-Based Controller, Omada hardware controller or Omada Software Controller; zero-touch provisioning needs the cloud controller. Without a controller the switch runs standalone from its own web interface and CLI. Powered devices must be 802.3af or 802.3at compliant.
Specifications
| SKU | TPL-SG3428XMP |
|---|---|
| Brand | TP-Link |
| Form factor | 28-port Gigabit L2+ managed PoE+ switch with 10G SFP+ uplinks, rackmount |
| Communication | Ethernet / IP |
| Power input | 100-240V AC, 50/60 Hz |
| Power consumption | 481.4 W max at 110V with 384 W of PoE load |
| Management | L2+ Managed |
| PoE | 802.3af PoE |
| PoE | 802.3at PoE+ |
| Port speed | Gigabit |
| Port speed | 10G |
| Works with | Omada |
| Ethernet ports | 24 x Gigabit RJ45 PoE+ |
| SFP slots | 4 x 1/10G SFP+ |
| Console ports | 1 x RJ45, 1 x Micro-USB |
| PoE budget | 384 W total, up to 30 W per port |
| PoE features | Perpetual PoE, Fast PoE |
| Switching capacity | 128 Gbps |
| Packet forwarding rate | 95.23 Mpps |
| MAC address table | 16K |
| Jumbo frame | 9 KB |
| VLANs | 4K 802.1Q VLANs, MAC, protocol, private and voice VLAN, VLAN mapping and replace |
| L2+ features | 48 IPv4/IPv6 static routes, DHCP server and relay, link aggregation, STP, ERPS, loopback detection |
| Security | 802.1X, RADIUS and TACACS+ AAA, ACLs, DHCP snooping, ARP inspection, port security, storm control |
| Controller management | Omada Cloud-Based, hardware or Software Controller; Omada app |
| Communication notes | Web GUI, CLI via console and Telnet, SNMP v1/v2c/v3, RMON, LLDP, sFlow, IPv6 |
| Cooling | 2 fans; typical 36.9 dBA at 1 m (80% PoE load, 77°F/25°C), fanless below 50 W PoE load |
| Surge protection | 6 kV |
| Mounting | 19-inch rack (rackmount kit and rubber feet included) |
| Dimensions | 17.3 x 13.0 x 1.7 in (440 x 330 x 44 mm) |
| Operating temp | 23°F to 113°F (-5°C to 45°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE |
| Package contents | SG3428XMP, power cord, RJ45 console cable, rackmount kit, rubber feet, screws, installation guide |
