Omada 28-Port Gigabit L2+ Managed PoE+ Switch, 24 PoE+ Ports, 384 W, 4 SFP Slots
SKU TPL-SG3428MP Model SG3428MP
- 24 Gigabit PoE+ ports with a 384 W budget and up to 30 W per port
- 4 Gigabit SFP slots for fiber uplinks to the core or another building
- L2+ static routing, VLANs, QinQ, ACLs, 802.1X and ERPS ring recovery
- Managed in Omada with zero-touch provisioning, or standalone by web UI and CLI
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports24 x Gigabit PoE+, 4 x SFP
- PoE384 W, 30 W per port
- ConnectivityL2+ managed, cloud or standalone
- Mount19-inch rack or desktop
- Size17.3 x 13.0 x 1.7 in
The Omada SG3428MP is a 28-port Gigabit L2+ managed switch with 24 PoE+ ports and a 384 W PoE budget, sized for a closet full of cameras, access points and phones. Four Gigabit SFP slots handle fiber uplinks to the core or between buildings, and the whole switch is managed in the same Omada site as the gateway and APs.
Built for camera and wireless deployments
Every RJ45 port is 802.3af/at PoE+ at up to 30 W, with Perpetual PoE keeping cameras powered through a switch reboot and Fast PoE bringing them up before the switch finishes booting. L2+ static routing, 802.1Q VLANs, QinQ, ACLs, 802.1X and IGMP snooping cover segmented camera, voice and guest networks. Manage it from the Omada controller or standalone through the web UI, CLI and SNMP, and mount it in a rack or on a desk.
Key features
- 384 W across 24 PoE+ ports: up to 30 W per port for PTZs, APs and phones
- Perpetual and Fast PoE: devices stay powered through a switch reboot and power up early on a cold start
- Four Gigabit SFP slots for fiber uplinks
- L2+ features: static routing, DHCP server, VLANs, QinQ, ACLs, QoS and ERPS ring recovery
- Zero-touch provisioning and batch firmware upgrades through the Omada Cloud-Based Controller
- Rack or desktop mount in a metal case, rackmount kit included
System requirements
Centralized management needs an Omada Cloud-Based Controller (firmware 5.15.22 or later), Omada hardware controller or Omada Software Controller (5.15.20 or later); zero-touch provisioning needs the cloud controller. Without a controller the switch runs standalone from its own web interface and CLI.
Specifications
| SKU | TPL-SG3428MP |
|---|---|
| Brand | TP-Link |
| Form factor | 28-port Gigabit L2+ managed PoE+ switch, rack or desktop |
| Communication | Ethernet / IP |
| Power input | 100-240V AC, 50/60 Hz |
| Power consumption | 478.6 W max at 110V with 384 W of PoE load |
| Management | L2+ Managed |
| PoE | 802.3af PoE |
| PoE | 802.3at PoE+ |
| Port speed | Gigabit |
| Works with | Omada |
| Ethernet ports | 24 x Gigabit RJ45 PoE+ |
| SFP slots | 4 x Gigabit SFP |
| Console ports | 1 x RJ45, 1 x Micro-USB |
| PoE budget | 384 W total, up to 30 W per port |
| PoE features | Perpetual PoE, Fast PoE |
| Switching capacity | 56 Gbps |
| Packet forwarding rate | 41.66 Mpps |
| MAC address table | 16K |
| Jumbo frame | 9 KB |
| VLANs | 4K 802.1Q VLANs, MAC, protocol, private and voice VLAN, QinQ |
| L2+ features | 48 IPv4/IPv6 static routes, DHCP server and relay, link aggregation, STP, ERPS, loopback detection |
| Security | 802.1X, RADIUS and TACACS+ AAA, ACLs, DHCP snooping, ARP inspection, port security, storm control |
| Controller management | Omada Cloud-Based (v5.15.22+), hardware or Software Controller (v5.15.20+); Omada app |
| Communication notes | Web GUI, CLI via console and Telnet, SNMP v1/v2c/v3, RMON, LLDP, sFlow, IPv6 |
| Cooling | 2 fans |
| Surge protection | ±6 kV |
| Mounting | 19-inch rack or desktop (rackmount kit included) |
| Dimensions | 17.3 x 13.0 x 1.7 in (440 x 330 x 44 mm) |
| Operating temp | 23°F to 113°F (-5°C to 45°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE |
| Package contents | SG3428MP, power cord, console cable, rackmount kit, rubber feet, installation guide |
