Omada 6-Port Gigabit Industrial Easy Managed PoE++ Switch, 1 PoE++ and 3 PoE+ Ports, 120 W
SKU TPL-IES206GPP Model IES206GPP
- One 60 W PoE++ port and three 30 W PoE+ ports from a budget of up to 120 W
- Runs from -40°F to 167°F (-40°C to 75°C) in a fanless IP40 aluminum case
- Two redundant 12-57V DC inputs, a fault relay output, DIN-rail or wall mount
- Easy Managed in Omada, with zero-touch provisioning through the cloud controller
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports4 PoE RJ45, 1 combo, 1 SFP
- PoE120 W, 60 W on port 1
- Power12-57V DC, redundant
- MountDIN-rail or wall
- Size6.1 x 4.7 x 2.4 in
The Omada IES206GPP is a six-port Gigabit industrial Easy Managed switch with one 60 W PoE++ port, three 30 W PoE+ ports and up to 120 W of PoE, so a camera or access point can be powered and networked from one DIN-rail box. It runs from -40°F to 167°F (-40°C to 75°C) in a fanless aluminum IP40 case.
Built for powered devices in harsh locations
The PoE budget follows the DC input you supply: 60 W from 12-21V DC and 120 W from 21-57V DC, on two redundant inputs. Port 1 delivers up to 60 W (802.3af/at/bt) for high-power devices; ports 2 to 4 deliver up to 30 W (802.3af/at). Fast PoE and Perpetual PoE keep devices on through a switch reboot. A combo RJ45/SFP slot and an SFP slot handle uplinks, and a fault relay output reports problems to alarm wiring.
Key features
- Up to 120 W PoE: 1 PoE++ port at up to 60 W and 3 PoE+ ports at up to 30 W each
- Budget set by your DC supply: 60 W from 12-21V DC or 120 W from 21-57V DC
- Fast PoE and Perpetual PoE: devices power up early and stay powered through a switch reboot
- -40°F to 167°F operating range: fanless aluminum case rated IP40, DIN-rail or wall mount
- Easy Managed in Omada: VLANs, QoS, STP/RSTP, LAG and zero-touch provisioning through the cloud controller
System requirements
A 12-57V DC power supply is needed and is not in the box; the PoE budget depends on its voltage and current. Powered devices must be 802.3af, 802.3at or 802.3bt compliant. The SFP slots need separate Gigabit SFP modules. Centralized management needs an Omada Cloud-Based, Hardware or Software Controller; zero-touch provisioning needs the cloud controller. Without a controller the switch runs standalone from its web GUI.
Specifications
| SKU | TPL-IES206GPP |
|---|---|
| Brand | TP-Link |
| Form factor | 6-port Gigabit industrial Easy Managed PoE++ switch, DIN-rail or wall mount |
| Communication | Ethernet / IP |
| Power input | 12-57V DC, 1+1 redundant inputs (power supply not included) |
| Power consumption | 79.48 W max with 60 W PoE load at 12V DC; 135.64 W max with 120 W PoE load at 24V DC |
| Management | Easy Managed |
| PoE | 802.3af PoE |
| PoE | 802.3at PoE+ |
| PoE | 802.3bt PoE++ |
| Port speed | Gigabit |
| Works with | Omada |
| Ethernet ports | 1 x Gigabit PoE++ RJ45, 3 x Gigabit PoE+ RJ45, 1 x Gigabit SFP/RJ45 combo |
| SFP slots | 1 x Gigabit SFP, 1 x Gigabit SFP/RJ45 combo |
| PoE budget | 60 W (12V/7.0A to 21V/3.5A input) or 120 W (21V/6.5A to 57V/2.3A input); port 1 up to 60 W, ports 2-4 up to 30 W |
| PoE features | Fast PoE, Perpetual PoE, 250 m (820 ft) PoE reach in Extend Mode (link drops to 10 Mbps) |
| Switching capacity | 12 Gbps |
| Packet forwarding rate | 8.93 Mpps |
| MAC address table | 8K |
| Jumbo frame | 15 KB |
| VLANs | 802.1Q tag VLAN (up to 32 VLAN groups, 4K VID), port-based VLAN, MTU VLAN |
| L2 features | Static link aggregation, STP/RSTP, loopback detection, 802.3x flow control, port mirroring, LLDP, IGMP v1/v2/v3 snooping with fast leave, 802.1p/DSCP QoS with 8 queues, storm control |
| Controller management | Omada Cloud-Based, Hardware or Software Controller; Omada app and cloud access through a controller |
| Communication notes | Web GUI, DHCP client, cable diagnostics, digital diagnostic monitoring (DDM); fault relay output 24 V / 1 A max (normally closed) |
| Cooling | Fanless |
| Surge protection | ±6 kV common mode on Ethernet ports, ±4 kV common mode on DC power input ports |
| Mounting | DIN-rail or wall mount, IP40 aluminum case (DIN-rail bracket and wall-mounting plates included) |
| Dimensions | 6.1 x 4.7 x 2.4 in (155 x 120 x 60 mm) |
| Operating temp | -40°F to 167°F (-40°C to 75°C) |
| Operating humidity | 5 to 95% RH, non-condensing |
| Compliance | FCC, CE |
| Package contents | IES206GPP, DIN-rail mounting bracket, wall-mounting plates, installation guide |
