• SS&Si
  • Kidde Commercial
  • Kidde | Genesis LED EG1 Compact Wall-Mount Chime, White, Fire Alarm NAC Notification Appliance | EG1-C
Genesis LED EG1 Compact Wall-Mount Chime, White, Fire Alarm NAC Notification Appliance
Kidde Commercial

Genesis LED EG1 Compact Wall-Mount Chime, White, Fire Alarm NAC Notification Appliance

SKU KD-EG1-C

New to SS&Si? Apply for a dealer account
Share
  • Fast shipping from four branches
  • 30-day returns on unopened products
Questions? Call us 866-364-0030The SS&Si dealer team

The Kidde Genesis LED EG1-C is a compact wall-mount chime built for commercial fire alarm notification appliance circuits. It fits standard single-gang electrical boxes with no trim ring, protrudes just over an inch from the wall, and installs with concealed mounting screws for a clean finished appearance.

Built for the commercial installer

Part of the Genesis LED EG1 Series, the EG1-C runs on 16 to 33 VDC from any compatible Kidde Commercial NAC circuit. The shallow-depth housing accepts 12 to 18 AWG wire through in-out screw terminals, and the compact form factor leaves room behind the device for wire management. Under-cover diagnostic test points let you verify circuit continuity without pulling the device off the wall. UL listed (UL 1971, UL 1638, UL 464), FCC certified, ICC listed, CSFM approved, and ADA compliant.

Key features

  • Compact single-gang form factor: mounts flush to standard 1-gang boxes, protrudes only 1-1/8" from the wall
  • 16 to 33 VDC operating range: compatible with Kidde CC Series panels, signal modules, booster and auxiliary power supplies
  • Concealed mounting screws: cover snaps in place for a clean, finished look with no visible hardware
  • Under-cover diagnostic test points: validate the NAC circuit and verify device function without removing the appliance
  • Quick-swap covers: change housing color or marking in the field without rewiring - available in red and white with FIRE or unmarked options
  • Backwards compatible: mixes with legacy Xenon-based Genesis devices on the same NAC circuit

System requirements

Requires a standard single-gang electrical box at least 1-1/2" deep. For boxes wider than 3", use the optional EG1TW (white) or EG1TR (red) trim ring. Compatible with Kidde Commercial CC Series Signal Modules, Booster and Auxiliary Power Supplies, and Intelligent and Conventional Control Panels.

Specifications

SKUKD-EG1-C
BrandKidde Commercial
Form factorCompact wall-mount chime, single-gang
Operating voltage16 to 33 VDC, 16 to 33 VFWR
Wire size12 to 18 AWG (0.75 to 2.50 mm²)
Dimensions3 x 4-5/8 x 1-1/8 in. (7.62 x 11.75 x 2.86 cm) (W x H x D)
Compatible electrical boxes1-gang, 2-gang, 4-inch octagon, 4-inch square
MountingWall mount, standard 1-gang electrical box (min. 1-1/2" deep)
Operating temp32 to 122°F (0 to 50°C)
Operating humidity0 to 93% noncondensing
ColorWhite
Synchronization20 Ω max. between any two devices
ComplianceFCC, ICC, UL 1971, UL 1638, UL 464, CSFM, ADA compliant
Trim ringsEG1TW (white), EG1TR (red) - 5 x 5-7/8 x 9/16 in.

Documents and resources

FAQs

What electrical box does the EG1-C mount to?
Standard 1-gang surface or flush electrical box at least 1-1/2" deep. Also fits 2-gang, 4-inch octagon, and 4-inch square boxes with the optional EG1TW (white) or EG1TR (red) trim ring.
Can EG1 devices be mixed with older Genesis Xenon strobes on the same circuit?
Yes. Genesis LED EG1 Series devices are backwards compatible with legacy Xenon-based Genesis appliances and can share the same NAC circuit.
What panels and power supplies are compatible with the EG1-C?
Kidde Commercial CC Series Signal Modules, Booster and Auxiliary Power Supplies, and Intelligent and Conventional Control Panels.
Can I change the cover color or marking after installation?
Yes. Quick-swap replacement covers are available in red and white with FIRE, ALERT (white only), FEU, FUEGO, or no marking options. Covers swap without removing the device from the wall or rewiring.
Does the EG1-C have diagnostic test points?
Yes. Under-cover test points let you validate the NAC circuit and verify device function while the appliance remains mounted to the wall.
All Kidde Commercial