The Kidde Genesis GCHFWN-S7VMB is a high fidelity 520 Hz ceiling-mount speaker-strobe built for commercial sleeping areas where NFPA 72 low-frequency signaling is required. The 70V speaker delivers crisp, intelligible voice audio from ¼ to 2 watts, and the blue-lens strobe provides field-selectable multi-candela output for mass notification applications - all in a low-profile package that fits flush on a standard 4-inch square box.
Built for the commercial installer
Mounts to any standard North American 4-inch square electrical box (2-1/8" deep) with no extension ring or trim plate needed. The shallow housing leaves room behind the signal for extra wiring, and #18 to #12 AWG screw terminals handle long runs and existing wire without re-pulls. Wattage and candela settings are accessible by unlatching the cover - no need to remove the device from the box - and switch positions stay visible through indicator windows after the cover is closed.
Key features
- 520 Hz high fidelity audio: meets NFPA requirements for newly constructed commercial sleeping areas including hotels, dormitories, and residential occupancies
- Field-selectable output: ¼, ½, 1, or 2 watt speaker taps and multi-candela blue strobe (6/12/31/40 cd) - adjust without removing the device
- 70V speaker circuit: standard 70V distributed audio for long cable runs in large commercial buildings
- Low-profile design: 30% slimmer than comparable signals, fits flush on standard 4" square boxes
- Blue lens for mass notification: differentiates emergency mass notification from fire alarm signaling per NFPA 72 color requirements
- UL and ULC listed: UL 464, UL 1480, UL 1638, UL 1971, ULC-S541 - approved for ceiling or wall mount, public and private mode
System requirements
Requires a compatible fire alarm control panel or mass notification system with 70 VRMS speaker output and 16-33 VDC (or 16-33 VFWR) strobe power. Strobe synchronization requires a compatible sync module or NAC output (GSA-CC1S, GSA-MCC1S, SIGA-CC2A, EG1M-RM, or other listed source). Part of the Genesis end-to-end audio system approved for sleeping areas when used with approved audio hardware and factory-supplied 520 Hz tone.
Does this meet NFPA 72 requirements for commercial sleeping areas?
What electrical box does this mount to?
Can I change wattage and candela after installation?
Why a blue lens instead of clear?
What synchronization modules work with this strobe?
Can this be wall-mounted instead of ceiling-mounted?
Spec Sheet