Genesis Mass Notification Ceiling Speaker-Strobe, 15 cd Selectable, White, No Marking, Red
SKU KD-GCSVWN-R
- Fast shipping from four branches
- 30-day returns on unopened products
The Genesis GCSVWN-R brings mass notification signaling to the ceiling plane without eating install time. Flush-mount it to a standard 4-inch square electrical box - no extension ring required - and tie into the existing 24 VDC notification circuit. Field-selectable candela output lets you dial in the right strobe intensity for the space without swapping hardware.
Built for the commercial installer
UL 1638, UL 1971, and UL 1480 listed with CSFM approval. The white housing with no marking keeps the device architecturally neutral in lobbies, corridors, and assembly areas where mass notification coverage is required but visual clutter isn't welcome. Speaker wiring uses standard #18 to #12 AWG screw terminals - the same connections you're already pulling for the rest of the notification circuit.
Key features
- Flush-mounts to standard 4" square boxes: 2-1/8" depth, no extension ring, no special backbox
- Field-selectable strobe output: adjust candela on-site to match the space without ordering a different model
- Speaker response 400-4,000 Hz: clear voice and tone reproduction for emergency messaging
- Synchronizable strobes: compatible with Genesis sync modules (GSA-CC1S, SIGA-CC2A, EG1M-RM) and select power supplies
- Indoor rated, 32F to 120F: covers standard commercial environments from coolers to mechanical rooms
- UV-stabilized housing exceeds UL 94V-0 flammability: no yellowing or embrittlement over time
System requirements
Requires a 24 VDC notification appliance circuit from a compatible Kidde fire alarm control panel. Strobe synchronization requires a Genesis-compatible sync module or power supply. Mount to any North American 4-inch square electrical box (2-1/8" deep minimum) or Kidde 960A-4RF round flush box.
Specifications
| SKU | KD-GCSVWN-R |
|---|---|
| Brand | Kidde Commercial |
| Form factor | Ceiling-mount speaker-strobe, mass notification |
| Mounting | Flush mount to 4" square electrical box, 2-1/8" (54 mm) deep, or 960A-4RF round flush box |
| Strobe output | Field selectable, 15 cd standard |
| Strobe operating voltage | 16-33 VDC (24 VDC nominal) or 16-33 VFWR (24 VFWR nominal) |
| Strobe flash rate | 1 flash per second |
| Speaker response | 400-4,000 Hz |
| Wire connections | Screw terminals, polarized, #18 to #12 AWG (0.75 mm² to 2.5 mm²) |
| Operating temp | 32°F to 120°F (0°C to 49°C) |
| Operating humidity | 0-93% RH, non-condensing |
| Housing | White, textured UV-stabilized engineered plastic, exceeds UL 94V-0 |
| Lens | Red, optical grade polycarbonate |
| Dimensions | 6.8" dia (173 mm), 1.0" depth (25 mm) from ceiling |
| Compliance | UL 1638, UL 1971, UL 1480, MEA, CSFM. UL/ULC File S2813 |
| Synchronization | GSA-CC1S, SIGA-CC2A, GSA-MCC2A, EG1M-RM, MIRBPS6A, MIRBPS10A, APS6A, APS10A |
Documents and resources
FAQs
What electrical box does this mount to?
Can I adjust the strobe output in the field?
Does this require a synchronization module?
Is this rated for outdoor installation?
What wire gauge does this accept?
More in Kidde Commercial
All Kidde Commercial-
Kidde Commercial
Kidde | Genesis Ceiling Speaker-Strobe, Mass Notification, Selectable 15/30/75/95 cd, Green Lens, White | GCSVWN-G
KD-GCSVWN-G
