• SS&Si
  • Kidde Commercial
  • Kidde | Genesis Field Configurable Mass Notification Ceiling Strobe, 15 cd, White Housing, Red Lens, ALERT Marking | GCVWA-R
Genesis Field Configurable Mass Notification Ceiling Strobe, 15 cd, White Housing, Red Lens, ALERT Marking
Kidde Commercial

Genesis Field Configurable Mass Notification Ceiling Strobe, 15 cd, White Housing, Red Lens, ALERT Marking

SKU KD-GCVWA-R

New to SS&Si? Apply for a dealer account
Share
  • Fast shipping from four branches
  • 30-day returns on unopened products
Questions? Call us 866-364-0030The SS&Si dealer team

The GCVWA-R is a Genesis series ceiling-mount strobe built for mass notification and emergency communication systems. It delivers 15 candela output through a red lens with ALERT marking, providing clear visual differentiation between mass notification and fire alarm signals in commercial facilities.

Built for the commercial installer

Genesis ceiling strobes protrude just 1.6 inches from the ceiling and mount flush to any standard North American 4-inch square electrical box - no extension ring, no trim plate, no extra hardware. The FullLight strobe technology produces smooth, even light distribution that exceeds UL cross-pattern requirements without the bulky specular reflectors found in competing products. Low current draw lets you load more devices per NAC circuit without upsizing power supplies or adding booster panels.

Key features

  • Field configurable candela output: selectable A/B/C/D settings via internal switch without removing the device from the ceiling
  • Low current draw: 63 mA typical at 24 Vdc (15 cd setting) maximizes device count per NAC circuit
  • FullLight strobe technology: smooth, even light distribution exceeding UL cross-pattern requirements
  • 1.6-inch profile: 30% slimmer than comparable ceiling strobes, no visible mounting screws
  • Red lens with ALERT marking: clear visual differentiation from fire alarm signals during mass notification events
  • Genesis synchronization: all devices flash in unison at one flash per second via Signal Master or compatible sync source

System requirements

Operates on regulated 16-33 Vdc or unfiltered 16-33 Vdc FWR from a listed FACP or mass notification system NAC circuit. Synchronize with an optional Genesis Signal Master (G1M-RM) or compatible synchronization source for code-compliant flash patterns across all devices on the circuit. Wire connections accept #18 to #12 AWG.

Specifications

SKUKD-GCVWA-R
BrandKidde Commercial
Form factorCeiling-mount visual notification appliance
ApplicationECS/MNS (Mass Notification / Emergency Communication System)
Power inputRegulated 16-33 Vdc or unfiltered 16-33 Vdc FWR
Current draw (15 cd)94 mA at 16 Vdc, 63 mA at 24 Vdc, 48 mA at 33 Vdc (typical)
Candela output15 cd (Setting D), field selectable A/B/C/D
Flash rate1 flash per second
SynchronizationGenesis Signal Master (G1M-RM) or compatible sync source (SIGA-CC1S, SIGA-CC2A, BPS6A, BPS10A, APS6A, APS10A, iO Series)
Wire connectionsScrew terminals, #18 to #12 AWG (0.75 mm² to 2.5 mm²)
MountingFlush mount to 4" square electrical box, 2-1/8" deep, no extension ring required
Dimensions6.8" diameter x 1.6" protrusion from ceiling
HousingWhite, textured UV stabilized engineered plastic, UL 94V-0 flammability rated
LensRed, optical grade polycarbonate
MarkingALERT
Operating temp32°F to 120°F (0°C to 49°C)
Operating humidity0-93% relative humidity, non-condensing
ComplianceUL 1971, UL 1638, CAN/ULC S526-02, CAN/ULC S524-01, ADA, CSFM, MEA

Documents and resources

FAQs

What's the difference between ECS/MNS and Life Safety Genesis ceiling strobes?
ECS/MNS models carry ALERT marking and colored lenses for mass notification. Life Safety models carry FIRE marking with a clear lens for fire alarm use. Same Genesis platform and mounting - the listing and marking determine the application.
Can I change the candela output after installation?
Yes. The Genesis ceiling strobe is field configurable. Twist the cover open, slide the candela switch to the desired A/B/C/D setting, and close it back up. No need to remove the strobe from the ceiling or disconnect wiring.
What electrical box does this strobe require?
Any standard North American 4-inch square electrical box, 2-1/8 inches deep. No extension ring or trim plate needed. The shallow Genesis profile leaves room behind the device for extra wire.
How does synchronization work with Genesis ceiling strobes?
Genesis strobes synchronize at one flash per second via a Genesis Signal Master (G1M-RM) or compatible sync source (SIGA-CC1S, SIGA-CC2A, BPS6A/10A, APS6A/10A, iO Series). Max wire resistance between any two devices is 20 ohms.
How many devices can I put on a single NAC circuit?
At 15 cd (D setting), the GCVWA-R draws 63 mA typical at 24 Vdc. Divide your panel's NAC capacity by per-device draw for the max count. Genesis low current draw allows more devices per circuit than competing strobes. See spec sheet for all settings.
All Kidde Commercial