Kidde | Genesis WG4 Outdoor Speaker-Strobe, White, No Marking, High Output Clear Lens | WG4WN-SVMHC

The WG4WN-SVMHC covers voice notification and high-output visual signaling in one weatherproof device, built for parking garages, loading docks, and other exposed areas where a standard-output strobe won't cut it.

Built for the commercial fire installer

Field-selectable speaker taps (1/4, 1/2, 1, or 2 watt) and voltage (25V or 70V) let one part number cover most audio circuit designs, and the strobe's four high-output candela settings (102/123/147/161 cd indoor, up to 65 cd outdoor per UL 1638) are set the same way - remove the cover and slide a switch, no separate model needed per candela rating. Settings stay visible after the cover goes back on through a sealed viewport. The full backplane sealing gasket allows installation to recessed in-the-pour boxes as well as surface boxes on raceways, and the shallow, low-profile housing rejects the elements down to -31°F.

Key features

• Field-selectable speaker wattage (1/4, 1/2, 1, 2W) and voltage (25V/70V)
• Field-selectable high-output strobe candela - 4 settings without swapping devices
• Rated -31°F to 151°F, indoor or outdoor
• Wall or ceiling mount, strobe positionable above, below, or to either side
• UL 1971/1638 synchronization compatible with Genesis and Integrity signals on the same circuit
• Room-side wiring - all connections made from inside for a faster install

System requirements

Wet locations require a Kidde 74347U outdoor-rated box; dry locations use a standard 4-inch square by 1-1/2-inch deep box (2-1/8-inch deep if using the optional WG4WTS trim skirt). Strobe synchronization requires a compatible control module (VM/VS/FX Series panels or GSA-CC1S/SIGA-CC2A-family modules).