• SS&Si
  • Kidde Commercial
  • Kidde | Genesis WG4 Outdoor Speaker-Strobe, White, No Marking, Standard Output Amber Lens | WG4WN-SVMA
Genesis WG4 Outdoor Speaker-Strobe, White, No Marking, Standard Output Amber Lens
Kidde Commercial

Genesis WG4 Outdoor Speaker-Strobe, White, No Marking, Standard Output Amber Lens

SKU KD-WG4WN-SVMA

New to SS&Si? Apply for a dealer account
Share
  • Fast shipping from four branches
  • 30-day returns on unopened products
Questions? Call us 866-364-0030The SS&Si dealer team

The WG4WN-SVMA covers voice notification and visual signaling in one weatherproof device, with an amber lens that visually separates mass notification alerts from red-lens fire alarm signals on the same site.

Built for the commercial fire installer

Field-selectable speaker taps (1/4, 1/2, 1, or 2 watt) and voltage (25V or 70V) let one part number cover most audio circuit designs, and the strobe's four standard-output candela settings are set the same way - remove the cover and slide a switch, no separate model needed per candela rating. Settings stay visible after the cover goes back on through a sealed viewport. The full backplane sealing gasket allows installation to recessed in-the-pour boxes as well as surface boxes on raceways, and the shallow, low-profile housing rejects the elements down to -31°F.

Key features

  • Field-selectable speaker wattage (1/4, 1/2, 1, 2W) and voltage (25V/70V)
  • Field-selectable amber strobe candela - 4 settings without swapping devices
  • Amber lens visually distinguishes ECS/MNS alerts from fire alarm signaling
  • Rated -31°F to 151°F, indoor or outdoor
  • Wall or ceiling mount, strobe positionable above, below, or to either side
  • UL 1971/1638 synchronization compatible with Genesis and Integrity signals on the same circuit

System requirements

Wet locations require a Kidde 74347U outdoor-rated box; dry locations use a standard 4-inch square by 1-1/2-inch deep box (2-1/8-inch deep if using the optional WG4WTS trim skirt). Strobe synchronization requires a compatible control module (VM/VS/FX Series panels or GSA-CC1S/SIGA-CC2A-family modules).

Specifications

SKUKD-WG4WN-SVMA
BrandKidde Commercial
Form factorOutdoor-rated wall/ceiling speaker-strobe, white, no marking
Strobe outputStandard output, amber: 13/25/59/62 cd indoor (UL 1971 equivalent)
Lens colorAmber
Speaker circuit25 VRMS or 70 VRMS, switch-selectable; 1/4, 1/2, 1, or 2W taps
Speaker output80.8 to 90.0 dBA depending on tap
Strobe circuit24 Vdc / 24 VFWR nominal
Operating environment-31°F to 151°F (-35°C to 66°C), 0-95% RH noncondensing
Wire size12 to 18 AWG
MountingWet: Kidde 74347U box; Dry: 4" square x 1-1/2" deep box (2-1/8" with trim skirt)

Documents and resources

FAQs

Why choose an amber lens?
Amber lenses distinguish mass notification (ECS/MNS) alerts from red-lens fire alarm strobes when both systems are visible in the same field of view.
Can the speaker wattage and voltage be changed after installation?
Yes. Remove the cover and slide the S1 (wattage) and S3 (voltage) switches to the desired setting; the wattage setting stays visible through a window after the cover is replaced.
What box is needed for outdoor installation?
A Kidde 74347U outdoor-rated electrical box is recommended for wet locations; a WG4WTS white trim skirt is available for a finished appearance.
Does this synchronize with other Genesis strobes?
Yes. It meets UL 1971 synchronization requirements (within 10 ms over 2 hours) when used with a compatible synchronization source.
All Kidde Commercial