You save

Luminys | 2-Door Web Access Controller | C-2PA

Luminys | 2-Door Web Access Controller | C-2PA

No reviews yet Write a Review
SKU:
LM-C-2PA

The Luminys C-2PA is a two-door web-based access controller. Configuration and day-to-day monitoring happen through a browser against the controller itself, with no dedicated software required. Cloud management via MQTT is available when the site needs remote oversight.

Built for the commercial installer

The C-2PA accepts either PoE (802.3af/at) or 12V DC input and draws under 8W, which keeps cabling and power planning simple. It supports Wiegand-26/34 and OSDP v2 readers on the same panel, so legacy Wiegand hardware and new OSDP deployments can coexist during a phased migration. The controller stores 20,000 users, 20,000 cards, and 100,000 event records locally.

Key features

  • Two doors on one controller: two lock relays (NO/NC, 2A @ 30V DC) plus two alarm inputs for door status and alarm contacts
  • Wiegand and OSDP together: four Wiegand-26/34 reader inputs and two OSDP v2 reader interfaces
  • Browser-based management: no dedicated software, no per-seat license, configure and monitor over HTTPS from any browser
  • Optional cloud management via MQTT
  • PoE or 12V DC input, under 8W total draw, single RJ45 for power and network
  • Anti-passback, alarm, and elevator functions built in
  • FCC, CE, and RoHS certified

System requirements

The controller mounts to a wall or inside an equipment enclosure and requires network connectivity via its single RJ45 port. Power is supplied by an 802.3af/at PoE switch or a 12V DC source. The unit carries an IK06 impact rating and is intended for indoor installation inside a protected space (IDF, MDF, or equipment closet).

Brand:
Luminys
Form factor:
Wall-mount access controller
Doors supported:
2
Reader inputs:
4 x Wiegand-26/34 or 2 x OSDP v2
Lock relays:
2 x NO/NC, 2A @ 30V DC
Alarm inputs:
2 x NO/NC (door status, alarm)
Alarm outputs:
1 x NO/NC relay, 2A @ 30V DC
Network:
1 x RJ45, 10/100 Mbps auto-negotiation, PoE
USB:
1 x USB 2.0
Power input:
PoE 802.3af/at or 12V DC
Power consumption:
User capacity:
20,000
Card capacity:
20,000
Event log capacity:
100,000 records
Communication:
TCP/IP, HTTPS, WSS
Cloud protocol:
MQTT
OSDP version:
v2
Operating temp:
-4Ā°F to 131Ā°F (-20Ā°C to 55Ā°C)
Operating humidity:
10% to 90% RH, non-condensing
Storage temp:
-22Ā°F to 158Ā°F (-30Ā°C to 70Ā°C)
Protection rating:
IK06
Dimensions:
5.46" x 3.54" x 1.06" (138.8 x 90 x 27 mm)
Weight:
0.44 lb (200 g)
Certifications:
FCC, CE, RoHS
How many doors does one C-2PA control?
Two doors, with four Wiegand-26/34 reader inputs or two OSDP v2 reader interfaces available on the same panel.
Does the controller require dedicated software?
No. Configuration and monitoring happen through a web browser directly against the controller over HTTPS. Cloud management via MQTT is optional.
What power options are supported?
PoE (802.3af/at) via the RJ45 port, or 12V DC input. Total draw is under 8W.
Does the C-2PA support OSDP readers?
Yes. Two OSDP v2 reader interfaces plus four Wiegand-26/34 reader inputs, which lets legacy Wiegand hardware and new OSDP deployments coexist on the same panel.
What are the user and event log capacities?
20,000 users, 20,000 cards, and 100,000 event records stored locally on the controller.
Is the C-2PA rated for outdoor installation?
No. The spec sheet lists an IK06 impact rating only, with no IP ingress rating published. Mount inside a protected enclosure or interior equipment space (IDF, MDF, or closet).

Spec Sheet

Download File

Related Products