R6 Extreme NVR, 32MP 128 Ch Dual Nic, 8SATA, Metadata, Lumisearch+, 10TB
SKU LM-R68-XNA10
- Fast shipping from four branches
- 30-day returns on unopened products
The Luminys R68-XNA10 is a 2U rack-mount NVR built for enterprise and commercial security installations that need serious channel density, intelligent analytics, and room to grow. It handles up to 128 IP camera channels at resolutions up to 32MP, with LumiSearch+, face recognition, video metadata, and VCA running directly on the recorder -- no add-on server required. This unit ships with 10TB of storage pre-installed and supports up to 160TB across its 8 SATA bays with RAID protection and hot-swap capability.
Built for the commercial installer
Dual 10/100/1000/2500 Mbps NICs let you dedicate one interface to camera ingestion and one to client access -- critical on high-bandwidth deployments where a single NIC creates a bottleneck. At full load (AI off), the R68-XNA handles 1,400 Mbps incoming. The NDAA-compliant hardware and FCC certification make it project-ready for government, education, and enterprise accounts without extra compliance review.
Key features
- 128 channels at up to 32MP: full camera count on one recorder with no channel licensing fees
- LumiSearch+ by camera: target search using body shape and clothing color across all connected LumiSearch-enabled cameras
- Recorder-side AI analytics: iMD (32CH), VCA (32CH), face detection (8CH), face recognition (8CH), and video metadata (8CH) -- no camera-side processing required
- Dual NIC up to 2.5 Gbps each: separate camera and management networks to eliminate bandwidth conflicts on large deployments
- 10TB pre-installed, expandable to 160TB: 8 SATA bays with RAID 0/1/5/6/10 and hot-swap support
- 4x HDMI + 2x VGA outputs: drive up to six displays simultaneously for command center or multi-monitor control room setups
- ONVIF and RTSP compatible: integrates with third-party IP cameras, not locked to Luminys hardware
- NDAA compliant, FCC certified: cleared for government and regulated commercial applications
System requirements
Network switch with sufficient bandwidth to aggregate camera feeds -- at 1,400 Mbps max throughput (AI off), a 10GbE uplink from the access layer is recommended for large deployments. Client access via LumiViewer desktop app or LumiViewer Mobile App. No additional server or VMS license required for recorder-side analytics. Camera-side features including LumiSearch require LumiSearch-compatible Luminys cameras.
Specifications
| SKU | LM-R68-XNA10 |
|---|---|
| Brand | Luminys |
| Form factor | 2U rack-mount NVR |
| Video input | 128 channels, up to 32MP |
| Recording bandwidth | Up to 1,400 Mbps (AI Off) / 700 Mbps (AI On) |
| Decoding | Smart H.265+, Smart H.264+, H.265, H.264, MJPEG |
| Live view | 1/4/8/9/16/25/36/64 divisions; 16-ch synchronous playback |
| Video output | 4x HDMI, 2x VGA |
| Storage included | 10TB pre-installed (1x HDD) |
| Max storage | Up to 160TB (8x SATA bays, up to 20TB per drive) |
| Storage interface | 8x SATA, 1x eSATA |
| RAID | RAID 0, 1, 5, 6, 10; hot swap supported |
| Network | Dual NIC, 2x RJ-45, 10/100/1000/2500 Mbps |
| USB | 2x USB 2.0 (front), 2x USB 3.0 (rear) |
| Serial | 1x RS-232, 1x RS-485 |
| Alarm | 16 inputs / 8 outputs |
| Audio | 1-ch RCA in, 2-ch RCA out; two-way audio supported |
| Power supply | 100-240 VAC, 50-60 Hz |
| Power consumption | |
| Operating temp | -10°C to 55°C (14°F to 131°F) |
| Operating humidity | 10% to 93% (non-condensing) |
| Dimensions | 442.0 x 457.3 x 88.0 mm (17.4 x 18.0 x 3.5 in.) |
| Weight | 7.2 kg (15.8 lb) without HDD |
| Interoperability | ONVIF, RTSP |
| Client software | LumiViewer, LumiViewer Mobile App |
| Compliance | NDAA, FCC |
