- Wireless technology Wi-Fi
Omada AC1200 Wall-Plate Wi-Fi 5 Access Point with 3 Gigabit Ports and PoE Passthrough
SKU TPL-EAP235-Wall Model EAP235-Wall
- AC1200 dual-band Wi-Fi 5 in a wall plate, rated for 200+ concurrent clients
- Gigabit uplink plus three Gigabit jacks, one with PoE out for a phone or IoT device
- Runs on 802.3af/at PoE; PoE out needs 802.3at PoE+ input and reaches 13 W
- Managed in Omada with the Cloud-Based, hardware or Software Controller
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- ConnectivityAC1200 Wi-Fi 5, MU-MIMO
- Ports1 uplink + 3 Gigabit jacks
- PoE802.3af/at in, 1 port out
- Range300 sq ft, 200+ clients
- MountWall plate
The Omada EAP235-Wall puts AC1200 Wi-Fi 5 and three wired Gigabit jacks in a wall-plate form factor, so one cable run to a hotel room, dorm or office gives the room both Wi-Fi and wired ports. One downlink port passes PoE through to a powered device such as an IP phone.
Built for the hospitality and MDU installer
The EAP235-Wall runs on 802.3af or 802.3at PoE from the closet switch, rated for 200+ concurrent clients over 300 sq ft. Dual-band Wi-Fi 5 delivers up to 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz. It adopts into an Omada site, so SSIDs, VLANs and channels are managed from the controller across every room.
Key features
- One drop, Wi-Fi plus wired: Gigabit uplink and three Gigabit downlink jacks at the wall
- PoE passthrough: one downlink port powers a device up to 13 W when the AP is fed 802.3at PoE+
- AC1200 dual-band Wi-Fi 5: MU-MIMO, beamforming, band steering and load balancing
- LAN port-based VLAN: plus SSID to VLAN mapping and client isolation
- Omada management: Cloud-Based, hardware or Software Controller, or the Omada app
System requirements
Zero-touch provisioning and cloud access require an Omada controller: the Omada Cloud-Based Controller, an Omada Hardware Controller (OC200 or OC300) or the Omada Software Controller. Power from an 802.3af/at PoE switch; PoE out on the downlink requires 802.3at PoE+ input.
Specifications
| SKU | TPL-EAP235-Wall |
|---|---|
| Brand | TP-Link |
| Form factor | Wall-plate dual-band Wi-Fi 5 access point |
| Communication | Ethernet / IP |
| Power input | 802.3af/at PoE |
| Power consumption | 9.8 W max; 24.4 W max with 13 W PoE output |
| Wi-Fi standard | Wi-Fi 5 |
| PoE | 802.3af PoE |
| PoE | 802.3at PoE+ |
| Port speed | Gigabit |
| Works with | Omada |
| Ethernet ports | Uplink: 1 x Gigabit RJ45; downlink: 3 x Gigabit RJ45 |
| PoE output | 1 downlink port, up to 13 W, requires 802.3at PoE+ input |
| Wireless standards | IEEE 802.11a/b/g/n/ac |
| Wireless speed | Up to 867 Mbps on 5 GHz, up to 300 Mbps on 2.4 GHz |
| Concurrent clients | 200+ |
| Coverage | 300 sq ft |
| Antennas | 2 x 4 dBi (2.4 GHz), 2 x 4 dBi (5 GHz) |
| SSIDs | Up to 16 (8 per band) |
| Wireless security | Captive portal, 802.1X, wireless MAC filtering, client isolation, SSID to VLAN mapping, LAN port-based VLAN, rogue AP detection, WPA/WPA2 Personal/Enterprise |
| Controller management | Omada Cloud-Based Controller, Omada Hardware Controller (OC200, OC300) or Omada Software Controller; Omada app |
| Communication notes | SNMP v1/v2c, SSH, HTTP/HTTPS, local/remote syslog, L3 and multi-site management, management VLAN, zero-touch provisioning via the Cloud-Based Controller |
| Mounting | Wall plate |
| Dimensions | 5.6 x 3.4 x 0.8 in (143 x 86 x 19.7 mm) |
| Operating temp | 32°F to 104°F (0°C to 40°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC |
| Package contents | EAP235-Wall, installation guide, mounting screw |
