- Wireless technology Wi-Fi
Omada AX1800 Wall-Plate Wi-Fi 6 Access Point with 3 Gigabit Ports and PoE Passthrough
SKU TPL-EAP615-Wall Model EAP615-Wall
- AX1800 dual-band Wi-Fi 6 in a wall plate, rated for 120+ concurrent clients
- Gigabit uplink plus three Gigabit jacks, one with PoE out for a phone or IoT device
- Runs on 802.3af/at PoE; PoE passthrough needs 802.3at PoE+ input
- Fits EU and US standard junction boxes and is managed in Omada controllers
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- ConnectivityAX1800 Wi-Fi 6
- Ports1 uplink + 3 Gigabit jacks
- PoE802.3af/at in, 1 port out
- Range600 sq ft, 120+ clients
- MountWall plate, kit included
The Omada EAP615-Wall puts AX1800 Wi-Fi 6 and three wired Gigabit jacks in a wall-plate form factor, so one cable run to a hotel room, dorm or office gives the room both strong Wi-Fi and wired ports for a TV, phone or desk. One downlink port passes PoE through to a powered device such as an IP phone.
Built for the hospitality and MDU installer
The EAP615-Wall runs on 802.3af or 802.3at PoE from the closet switch and covers up to 600 sq ft with 120+ concurrent clients. Dual-band Wi-Fi 6 delivers up to 1201 Mbps on 5 GHz and 574 Mbps on 2.4 GHz. It adopts into an Omada site, so SSIDs, VLANs and channels are managed from the controller across every room.
Key features
- One drop, Wi-Fi plus wired: Gigabit uplink and three Gigabit downlink jacks at the wall
- PoE passthrough: one downlink port powers a device when the AP is fed 802.3at PoE+
- AX1800 dual-band Wi-Fi 6: OFDMA, MU-MIMO, beamforming and band steering
- Slim wall-plate body: 0.8 in (19.7 mm) deep, with the mounting kit included
- Omada management: hardware, software or cloud-based controller, or the Omada app
System requirements
Zero-touch provisioning and cloud access require an Omada controller: an Omada Hardware Controller, the Omada Software Controller or the Omada Cloud-Based Controller. Power from an 802.3af/at PoE switch; PoE passthrough on the downlink requires 802.3at PoE+ input. Wi-Fi 6 features depend on client support.
Specifications
| SKU | TPL-EAP615-Wall |
|---|---|
| Brand | TP-Link |
| Form factor | Wall-plate dual-band Wi-Fi 6 access point |
| Communication | Ethernet / IP |
| Power input | 802.3af/at PoE |
| Power consumption | 11.5 W max (US, 802.3at, PoE out off) |
| Wi-Fi standard | Wi-Fi 6 |
| PoE | 802.3af PoE |
| PoE | 802.3at PoE+ |
| Port speed | Gigabit |
| Works with | Omada |
| Ethernet ports | Uplink: 1 x Gigabit RJ45; downlink: 3 x Gigabit RJ45 |
| PoE output | 1 downlink port, requires 802.3at PoE+ input; up to 12 W (US) or 13 W (EU) lab tested |
| Wireless standards | IEEE 802.11ax/ac/n/g/b/a |
| Wireless speed | Up to 1201 Mbps on 5 GHz, up to 574 Mbps on 2.4 GHz |
| Concurrent clients | 120+ |
| Coverage | 600 sq ft |
| Antennas | 2 x 3 dBi (2.4 GHz), 2 x 4 dBi (5 GHz) |
| SSIDs | Up to 16 (8 per band) |
| Wireless security | WPA3, WPA2 and WPA Personal/Enterprise, captive portal, 802.1X, MAC filtering, client isolation, VLAN, rogue AP detection |
| Controller management | Omada Hardware Controller, Omada Software Controller or Omada Cloud-Based Controller; Omada app |
| Communication notes | SNMP v1/v2c/v3, SSH, HTTP/HTTPS, local/remote syslog, L3 and multi-site management, management VLAN, zero-touch provisioning via the Cloud-Based Controller |
| Mounting | Wall plate (kit included); fits EU and US standard junction boxes |
| Dimensions | 5.6 x 3.4 x 0.8 in (143 x 86 x 19.7 mm) |
| Operating temp | 32°F to 104°F (0°C to 40°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | CE, FCC |
| Package contents | EAP615-Wall, installation guide, mounting kit |
