TP-Link

Omada AX3000 Desktop Wi-Fi 6 GPON Access Point, 4 Gigabit Ports, 2 PoE Out, FXS Port

SKU TPL-EAP650GP-Desktop Model EAP650GP-Desktop

  • AX3000 Wi-Fi 6 access point with a GPON fiber uplink for 100+ concurrent clients
  • Four Gigabit LAN ports, two with 802.3af PoE out, plus an FXS port for a phone
  • GPON: 2.488 Gbps down, 1.244 Gbps up, single-mode fiber up to 20 km
  • Desktop or wall mounting kit included; Omada managed; 53.5V DC powered
  • Fast shipping from four branches
  • 30-day returns on unopened products

Product highlights

  • ConnectivityAX3000 Wi-Fi 6 + GPON
  • Ports4 x Gigabit RJ45, GPON, FXS
  • PoE2 ports 802.3af out, 22.4 W
  • Power53.5V/0.81A DC
  • MountDesktop or wall

The Omada EAP650GP-Desktop brings fiber to the room: a GPON port feeds AX3000 Wi-Fi 6, four Gigabit LAN ports and an FXS port for an analog phone, so one fiber drop delivers data, voice and Wi-Fi. Two LAN ports supply 802.3af PoE for a camera or IP phone.

Built for fiber-to-the-room jobs

The GPON interface is a single-mode SC/APC port (Class B+, 2.488 Gbps down, 1.244 Gbps up, up to 20 km). The unit runs from a 53.5V/0.81A DC input rather than PoE, and the two PoE ports share 22.4 W, with a 15.4 W per-port limit. Wi-Fi 6 delivers up to 2402 Mbps on 5 GHz and 574 Mbps on 2.4 GHz for 100+ clients.

Key features

  • GPON uplink: single-mode SC/APC port, 2.488 Gbps down and 1.244 Gbps up
  • Two PoE-out ports: 802.3af, 22.4 W total, ETH0 has priority over ETH1 by default
  • FXS port: RJ11 for an analog phone or fax over VoIP
  • AX3000 Wi-Fi 6: OFDMA and MU-MIMO with up to 2402 Mbps on 5 GHz
  • Desktop or wall mounting: kit included
  • Omada managed: mesh, roaming and captive portal through the Omada controller

System requirements

Requires a GPON OLT on the fiber side and an Omada controller for roaming, mesh and captive portal. The AP is powered by 53.5V DC, not PoE. Wi-Fi 6 features depend on the client devices supporting them.

Specifications

SKUTPL-EAP650GP-Desktop
BrandTP-Link
Form factorDesktop/wall-mount GPON dual-band Wi-Fi 6 access point
CommunicationEthernet / IP
Power input53.5V/0.81A DC
Power consumption20 W max (PoE out not included)
Wi-Fi standardWi-Fi 6
PoE802.3af PoE
Port speedGigabit
Works withOmada
Ethernet ports4 x Gigabit RJ45, 1 x GPON, 1 x FXS (RJ11)
GPON port1 x SC/APC, single-mode 9/125 um, Class B+, 2.488 Gbps down, 1.244 Gbps up, up to 20 km
PoE output2 Gigabit ports, 802.3af, 22.4 W total, 15.4 W per-port limit
Wireless standardsIEEE 802.11a/b/g/n/ac/ax
Wireless speedUp to 2402 Mbps on 5 GHz, up to 574 Mbps on 2.4 GHz
Concurrent clients100+
AntennasInternal omni: 2 x 4.5 dBi (2.4 GHz), 3 x 5 dBi (5 GHz)
SSIDsUp to 16 (8 per band)
Wireless securityWPA3, WPA2 and WPA Personal/Enterprise, 802.1X, captive portal, rogue AP detection, client isolation, VLAN, MAC filter up to 4,000 entries
Controller managementOmada Central (Cloud-Based), Hardware and Software Controller; Omada app
Communication notesSNMP v1/v2c/v3, SSH, web management, system log, NTP, email alerts, restore and backup
MountingDesktop or wall (kit included)
Dimensions6.9 x 5.5 x 1.3 in (175 x 140 x 33 mm)
Operating temp32°F to 104°F (0°C to 40°C)
Operating humidity10 to 90% RH, non-condensing
ComplianceCE, FCC, RoHS
Package contentsEAP650GP-Desktop, desktop/wall mounting kit, installation guide

Documents and resources

FAQs

Does the EAP650GP-Desktop run on PoE?
No. It takes 53.5V/0.81A DC. Its two PoE ports are outputs only, 802.3af at 22.4 W total.
What fiber connector does the GPON port use?
A single-mode SC/APC port, Class B+, 2.488 Gbps down and 1.244 Gbps up, up to 20 km.
Is a power adapter in the box?
The package list shows the AP, a mounting kit and the installation guide, so confirm power supply before the job.
What does the FXS port do?
It is an RJ11 port for an analog phone or fax over VoIP.
How is PoE out shared?
The two PoE ports share 22.4 W. A port shuts off above 15.4 W, and ETH0 has priority over ETH1 by default.