TP-Link

Omada 24-Port 10/100 Mbps Smart PoE+ Switch, 250 W, 2 Gigabit RJ45 and 2 Gigabit Combo Ports

SKU TPL-SL2428P Model SL2428P

  • 24 10/100 Mbps PoE+ ports with a 250 W budget and up to 30 W per port
  • Four Gigabit uplinks: two RJ45 and two combo RJ45/SFP for fiber
  • VLANs, ACLs, 802.1X and static routing in a 1U steel rackmount case
  • Managed in Omada with zero-touch provisioning, or standalone by web UI and CLI
  • Fast shipping from four branches
  • 30-day returns on unopened products

Product highlights

  • Ports24 x 10/100 PoE+, 4 x Gigabit
  • PoE250 W, 30 W per port
  • Mount19-inch rackmount
  • Size17.3 x 7.1 x 1.7 in

The Omada SL2428P is a Smart switch with 24 10/100 Mbps PoE+ ports, four Gigabit uplink ports and a 250 W budget, aimed at camera and phone jobs where Fast Ethernet is enough for every endpoint. Two of the uplinks are combo RJ45/SFP ports, so fiber is an option, and it is managed in the same Omada site as the gateway and APs.

Built for cameras and phones on Fast Ethernet

All 24 PoE+ ports run at 10/100 Mbps, which covers most IP cameras and phones at a lower cost per port than a Gigabit PoE switch. Two Gigabit RJ45 ports and two Gigabit combo RJ45/SFP ports handle the NVR and the uplink. 802.1Q VLANs, static routing, ACLs and 802.1X cover segmented camera, voice and guest networks, and the 1U steel case mounts in a 19-inch rack with the included brackets.

Key features

  • 24 PoE+ ports, 250 W total: up to 30 W per port at 10/100 Mbps for cameras and phones
  • Four Gigabit uplinks: two RJ45 ports and two combo RJ45/SFP ports for the NVR and fiber
  • Perpetual and Fast PoE: devices stay powered through a switch reboot and power up early on a cold start
  • VLANs, static routing and ACLs: up to 4K VLAN groups and 32 IPv4/IPv6 static routes
  • Rackmount: brackets, screws and feet included
  • Omada management: zero-touch provisioning and batch firmware upgrades through the cloud controller

System requirements

Powered from 100-240V AC with the included power cord. Powered devices must be 802.3af or 802.3at compliant, and the 24 PoE+ ports link at 10/100 Mbps only. Centralized management needs an Omada Cloud-Based Controller (firmware 5.15.22 or later), Omada hardware controller or Omada Software Controller (5.15.20 or later); zero-touch provisioning needs the cloud controller. Without a controller the switch runs standalone from its own web interface and CLI.

Specifications

SKUTPL-SL2428P
BrandTP-Link
Form factor24-port 10/100 Mbps Smart PoE+ switch with 4 Gigabit uplinks, 19-inch rackmount
CommunicationEthernet / IP
Power input100-240V AC, 50/60 Hz
Power consumption289.6 W max at 110V with 250 W of PoE load
ManagementSmart
PoE802.3af PoE
PoE802.3at PoE+
Port speedFast Ethernet
Port speedGigabit
Works withOmada
Ethernet ports24 x 10/100 Mbps RJ45 PoE+, 2 x Gigabit RJ45
SFP slots2 x Gigabit combo RJ45/SFP
PoE budget250 W total, up to 30 W per port
PoE featuresPerpetual PoE, Fast PoE
Switching capacity12.8 Gbps
Packet forwarding rate9.52 Mpps
MAC address table8K
Jumbo frame9 KB
VLANs4K 802.1Q VLAN groups, MAC, protocol and voice VLAN, GVRP
L2+ features32 IPv4/IPv6 static routes, DHCP server and relay, link aggregation with LACP, STP/RSTP/MSTP, loopback detection
Security802.1X, RADIUS AAA, ACLs, DHCP snooping, ARP inspection, port security, storm control
Controller managementOmada Cloud-Based (v5.15.22+), hardware or Software Controller (v5.15.20+); Omada app
Communication notesWeb GUI, CLI through Telnet, SNMP v1/v2c/v3, RMON, LLDP/LLDP-MED, IGMP snooping, IPv6
Cooling2 fans
Surge protection±6 kV
MountingRackmount (mounting brackets and feet included)
Dimensions17.3 x 7.1 x 1.7 in (440 x 180 x 44 mm)
Operating temp23°F to 122°F (-5°C to 50°C)
Operating humidity10 to 90% RH, non-condensing
ComplianceFCC, CE
Package contentsSL2428P, power cord, mounting brackets, mounting feet, screws, installation guide

Documents and resources

FAQs

How fast are the PoE ports on the SL2428P?
All 24 PoE+ ports link at 10/100 Mbps, which is enough for most IP cameras and phones. For Gigabit PoE ports choose the SG2428P.
How many PoE cameras can it power?
All 24 PoE+ ports share a 250 W budget at up to 30 W each. Divide 250 W by each camera's max draw to size the job.
What are the combo ports?
Two Gigabit combo RJ45/SFP ports can use either copper or an SFP module. Two more Gigabit RJ45 ports are copper only.
Does it need an Omada controller?
No. It runs standalone from its web interface and CLI. An Omada controller adds centralized management, and the cloud controller adds zero-touch provisioning.
Does it come with rack ears?
Yes. Mounting brackets and screws are included for a 19-inch rack, with mounting feet for a shelf.