Omada 16-Port 2.5G L2+ Managed Switch, 4 PoE++ and 12 PoE+ Ports, 240 W, 2 x 10G SFP+ Slots
SKU TPL-SG3218XP-M2 Model SG3218XP-M2
- 16 2.5G ports: 4 PoE++ at up to 90 W and 12 PoE+ at up to 30 W
- 240 W total PoE budget for APs, cameras and high-draw devices
- 2 10G SFP+ slots for uplinks and 120 Gbps of switching capacity
- Managed in Omada with zero-touch provisioning, or standalone by web UI and CLI
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports16 x 2.5G, 2 x 10G SFP+
- PoE240 W, up to 90 W per port
- ConnectivityL2+ managed, cloud or standalone
- Mount19-inch rack
- Size17.3 x 7.1 x 1.7 in
The Omada SG3218XP-M2 is a 16-port 2.5G L2+ managed switch with four 802.3bt PoE++ ports, twelve PoE+ ports and a 240 W budget, built for mixed jobs where a few high-draw devices sit alongside multi-gig APs and cameras. Two 10G SFP+ slots carry the uplink.
Built for mixed multi-gig and high-power jobs
Ports 1 to 4 deliver up to 90 W each for PTZ cameras, outdoor APs and other power-hungry devices, and ports 5 to 16 deliver up to 30 W, all at up to 2.5 Gbps and all sharing 240 W. Perpetual PoE keeps cameras powered through a switch reboot and Fast PoE brings them up before the switch finishes booting. It manages in the same Omada site as the gateway and APs, and mounts in a 19-inch rack.
Key features
- Four PoE++ ports at up to 90 W for PTZs, outdoor APs and other high-draw devices
- Twelve PoE+ ports at up to 30 W with a 240 W total budget
- 2.5G on all 16 RJ45 ports for multi-gig Wi-Fi access points
- Two 10G SFP+ slots for uplinks to the core or a server
- Perpetual and Fast PoE: devices stay powered through a switch reboot and power up early on a cold start
System requirements
Centralized management needs an Omada Cloud-Based Controller (firmware 5.15.22 or later), Omada hardware controller or Omada Software Controller (5.15.20 or later); zero-touch provisioning needs the cloud controller. Without a controller the switch runs standalone from its own web interface and CLI. Powered devices must be 802.3af, 802.3at or 802.3bt compliant.
Specifications
| SKU | TPL-SG3218XP-M2 |
|---|---|
| Brand | TP-Link |
| Form factor | 16-port 2.5G L2+ managed PoE++ switch, 2 x 10G SFP+, rackmount |
| Communication | Ethernet / IP |
| Power input | 100-240V AC, 50/60 Hz |
| Power consumption | 291.16 W max at 110V with 240 W of PoE load |
| Management | L2+ Managed |
| PoE | 802.3af PoE |
| PoE | 802.3at PoE+ |
| PoE | 802.3bt PoE++ |
| Port speed | 2.5G |
| Port speed | 10G |
| Works with | Omada |
| Ethernet ports | 16 x 2.5G RJ45 (4 PoE++, 12 PoE+) |
| SFP slots | 2 x 10G SFP+ |
| Console ports | 1 x RJ45, 1 x Micro-USB |
| PoE budget | 240 W total; ports 1-4 up to 90 W, ports 5-16 up to 30 W |
| PoE features | Perpetual PoE, Fast PoE, PoE extend mode |
| Switching capacity | 120 Gbps |
| Packet forwarding rate | 89.28 Mpps |
| MAC address table | 16K |
| Jumbo frame | 9 KB |
| VLANs | 4K 802.1Q VLANs, MAC, protocol and voice VLAN, VLAN mapping and replace |
| L2+ features | 48 IPv4/IPv6 static routes, DHCP server and relay, link aggregation, STP, ERPS, loopback detection |
| Security | 802.1X, RADIUS and TACACS+ AAA, ACLs, DHCP snooping, ARP inspection, port security, storm control |
| Controller management | Omada Cloud-Based (v5.15.22+), hardware or Software Controller (v5.15.20+); Omada app |
| Communication notes | Web GUI, CLI via console and Telnet, SNMP v1/v2c/v3, RMON, LLDP, sFlow, IPv6 |
| Cooling | 2 fans |
| Surge protection | 6 kV |
| Mounting | 19-inch rack (rackmount kit and rubber feet included) |
| Dimensions | 17.3 x 7.1 x 1.7 in (440 x 180 x 44 mm) |
| Operating temp | 23°F to 122°F (-5°C to 50°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE |
| Package contents | SG3218XP-M2, power cord, console cable, rackmount kit, rubber feet, screws, installation guide |
