Omada 6-Port Gigabit Smart PoE+ Switch, 4 PoE+ Ports, 63 W, 1 Gigabit SFP Slot
SKU TPL-SG2206MP Model SG2206MP
- 4 Gigabit PoE+ ports with a 63 W budget and up to 30 W per port
- One Gigabit SFP slot for a fiber uplink to the core or another building
- Perpetual PoE and Fast PoE keep cameras up through a switch reboot
- Managed in Omada with zero-touch provisioning, or standalone by web UI and CLI
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports5 x Gigabit RJ45, 1 x SFP
- PoE63 W, 30 W per port
- MountDesktop or wall
- Size6.2 x 4.0 x 1.0 in
The Omada SG2206MP is a compact 6-port Gigabit Smart switch with four PoE+ ports at up to 30 W each and a 63 W budget, plus an SFP slot for a fiber uplink. It suits a small camera or access point job at a remote building where one fiber run needs to feed a few powered devices.
Built for small jobs with a fiber uplink
Ports 1 to 4 are 802.3af/at PoE+, one more Gigabit RJ45 port handles a data device, and the Gigabit SFP slot takes the uplink. Perpetual PoE keeps devices powered through a switch reboot and Fast PoE brings them up early on a cold start. It is fanless, sits on a desk or mounts on a wall, and adopts into the same Omada site as the gateway and APs.
Key features
- 4 PoE+ ports, 63 W total: up to 30 W per port for cameras, APs and phones
- Gigabit SFP slot: for a fiber uplink to the core or another building
- Perpetual and Fast PoE: devices stay powered through a switch reboot and power up early on a cold start
- VLANs, ACLs and static routing: for segmented camera and data networks
- Fanless desktop or wall mount: silent in an office, rubber feet included
System requirements
Uses the included 53.5V DC external power adapter. Powered devices must be 802.3af or 802.3at compliant. Centralized management needs an Omada Cloud-Based Controller (firmware 5.15.22 or later), Omada hardware controller or Omada Software Controller (5.15.20 or later); zero-touch provisioning needs the cloud controller. Without a controller the switch runs standalone from its own web interface and CLI.
Specifications
| SKU | TPL-SG2206MP |
|---|---|
| Brand | TP-Link |
| Form factor | 6-port Gigabit Smart PoE+ switch with SFP slot, desktop or wall mount |
| Communication | Ethernet / IP |
| Power input | External adapter, 53.5V DC / 1.31A (included) |
| Power consumption | 73.7 W max at 110V with 63 W of PoE load |
| Management | Smart |
| PoE | 802.3af PoE |
| PoE | 802.3at PoE+ |
| Port speed | Gigabit |
| Works with | Omada |
| Ethernet ports | 5 x Gigabit RJ45 (ports 1-4 PoE+) |
| SFP slots | 1 x Gigabit SFP |
| PoE budget | 63 W total, up to 30 W per port |
| PoE features | Perpetual PoE, Fast PoE |
| Switching capacity | 12 Gbps |
| Packet forwarding rate | 8.93 Mpps |
| MAC address table | 8K |
| Jumbo frame | 9 KB |
| VLANs | 4K 802.1Q VLAN groups, MAC, protocol and voice VLAN, GVRP |
| L2+ features | 32 IPv4/IPv6 static routes, DHCP server and relay, link aggregation with LACP, STP/RSTP/MSTP, loopback detection |
| Security | 802.1X, RADIUS AAA, ACLs, DHCP snooping, ARP inspection, port security, storm control |
| Controller management | Omada Cloud-Based (v5.15.22+), hardware or Software Controller (v5.15.20+); Omada app |
| Communication notes | Web GUI, CLI through Telnet, SNMP v1/v2c/v3, RMON, LLDP/LLDP-MED, IGMP snooping, IPv6 |
| Cooling | Fanless |
| Surge protection | ±6 kV on Ethernet ports (common mode) |
| Mounting | Desktop or wall mount |
| Dimensions | 6.2 x 4.0 x 1.0 in (158 x 100.7 x 25.4 mm) |
| Operating temp | 23°F to 104°F (-5°C to 40°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE |
| Package contents | SG2206MP, power adapter, power cord, rackmount kit, rubber feet, installation guide |
