Omada 10-Port Gigabit Smart PoE+ Switch, 8 PoE+ Ports, 61 W, 2 Gigabit SFP Slots, Desktop
SKU TPL-SG2210P Model SG2210P
- 8 Gigabit PoE+ ports sharing a 61 W budget for low-draw cameras and APs
- Two SFP slots for fiber uplinks to the core or between buildings
- VLANs, ACLs, 802.1X and static routing in a fanless steel case
- Managed in Omada with zero-touch provisioning, or standalone by web UI and CLI
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports8 x Gigabit PoE+, 2 x SFP
- PoE61 W, 802.3af/at
- MountDesktop or wall
- Size8.2 x 4.9 x 1.0 in
The Omada SG2210P is a 10-port Gigabit Smart switch with eight PoE+ ports and a 61 W budget, a quiet desktop option for small sites running low-draw cameras, access points and phones. Two SFP slots handle fiber uplinks, and it manages in the same Omada site as the gateway and APs.
Built for low-power PoE loads
Eight RJ45 ports supply 802.3af/at PoE+ from a shared 61 W budget. Perpetual PoE keeps devices powered through a switch reboot and Fast PoE brings them up before the switch finishes booting. VLANs, ACLs, 802.1X and static routing cover segmented networks, and the fanless steel case sits on a desk or mounts on a wall.
Key features
- 8 PoE+ ports, 61 W total: 802.3af/at, sized for cameras, APs and phones
- Perpetual and Fast PoE: devices stay powered through a switch reboot and power up early on a cold start
- Two SFP slots: for fiber uplinks to the core or between buildings
- VLANs, static routing and ACLs: up to 4K VLAN groups and 32 IPv4/IPv6 static routes
- Fanless steel case: silent in an office, desktop or wall mount
System requirements
Uses the included 53.5V DC external power adapter. Powered devices must be 802.3af or 802.3at compliant. Centralized management needs an Omada Cloud-Based Controller (firmware 5.15.22 or later), Omada hardware controller or Omada Software Controller (5.15.20 or later); zero-touch provisioning needs the cloud controller. Without a controller the switch runs standalone from its own web interface and CLI.
Specifications
| SKU | TPL-SG2210P |
|---|---|
| Brand | TP-Link |
| Form factor | 10-port Gigabit Smart PoE+ switch with SFP slots, desktop or wall mount |
| Communication | Ethernet / IP |
| Power input | External adapter, 53.5V DC / 1.31A (included) |
| Power consumption | 72.8 W max at 110V with 61 W of PoE load |
| Management | Smart |
| PoE | 802.3af PoE |
| PoE | 802.3at PoE+ |
| Port speed | Gigabit |
| Works with | Omada |
| Ethernet ports | 8 x Gigabit RJ45 PoE+ |
| SFP slots | 2 x 100/1000 Mbps SFP |
| PoE budget | 61 W total |
| PoE features | Perpetual PoE, Fast PoE |
| Switching capacity | 20 Gbps |
| Packet forwarding rate | 14.88 Mpps |
| MAC address table | 8K |
| Jumbo frame | 9 KB |
| VLANs | 4K 802.1Q VLAN groups, MAC, protocol and voice VLAN, GVRP |
| L2+ features | 32 IPv4/IPv6 static routes, DHCP server and relay, link aggregation with LACP, STP/RSTP/MSTP, loopback detection |
| Security | 802.1X, RADIUS AAA, ACLs, DHCP snooping, ARP inspection, port security, storm control |
| Controller management | Omada Cloud-Based (v5.15.22+), hardware or Software Controller (v5.15.20+); Omada app |
| Communication notes | Web GUI, CLI through Telnet, SNMP v1/v2c/v3, RMON, LLDP/LLDP-MED, IGMP snooping, IPv6 |
| Cooling | Fanless |
| Surge protection | ±6 kV |
| Mounting | Desktop or wall mount |
| Dimensions | 8.2 x 4.9 x 1.0 in (209 x 126 x 26 mm) |
| Operating temp | 23°F to 104°F (-5°C to 40°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE |
| Package contents | SG2210P, power adapter, power cord, mounting feet, installation guide |
