TP-Link

Omada 8-Port Gigabit Easy Managed Switch, Fanless Metal Case, Desktop or Wall Mount

SKU TPL-ES208G Model ES208G

  • 8 Gigabit RJ45 ports with 16 Gbps switching capacity in a fanless case
  • 802.1Q VLANs, IGMP snooping and loopback detection for small networks
  • Port isolation, port mirroring, static LAG and per-port rate limiting
  • Adopts into Omada with zero-touch provisioning, or runs standalone by web GUI
  • Fast shipping from four branches
  • 30-day returns on unopened products

Product highlights

  • Ports8 x Gigabit RJ45
  • MountDesktop or wall
  • Size6.2 x 4.0 x 1.0 in
  • CompatibilityOmada controller managed

The Omada ES208G is an 8-port Gigabit Easy Managed switch for a small office, a utility closet or a camera and AP cluster that needs VLANs and loop protection without stepping up to a Smart switch. It adopts into the same Omada site as the gateway and access points.

Built for small offices and camera networks

All eight ports are 10/100/1000 RJ45 with auto MDI/MDIX and 16 Gbps of switching capacity. 802.1Q VLANs, IGMP snooping and loopback detection are built in, with QoS and port isolation for keeping surveillance traffic in line. The fanless metal case sits on a desk or mounts on a wall.

Key features

  • 8 Gigabit RJ45 ports: uplink, recorder and drops on one switch, all at wire speed
  • VLANs and IGMP snooping: 802.1Q tagging with up to 32 VLAN groups keeps traffic apart
  • Loop protection: loopback detection catches a patching mistake before it takes the site down
  • Fanless metal case: silent in use, desktop or wall mount, with a physical security lock slot
  • Omada management: zero-touch provisioning and batch firmware upgrades through the cloud controller

System requirements

Uses the included 5V DC external power adapter (100-240V AC input). This model has no PoE output. Centralized management needs an Omada Cloud-Based, Hardware or Software Controller on built-in version 6.1.0 or later; zero-touch provisioning needs the cloud controller. Without a controller the switch runs standalone from its web interface.

Specifications

SKUTPL-ES208G
BrandTP-Link
Form factor8-port Gigabit Easy Managed switch, desktop or wall mount
CommunicationEthernet / IP
Power inputExternal adapter, 5V DC / 0.6A, 100-240V AC input (included)
Power consumption2.679 W max at 220V
ManagementEasy Managed
Port speedGigabit
Works withOmada
Ethernet ports8 x Gigabit RJ45
Switching capacity16 Gbps
Packet forwarding rate11.9 Mpps
MAC address table8K
Jumbo frame15 KB
VLANs802.1Q tag VLAN, up to 32 VLAN groups (4K VID)
L2 featuresStatic link aggregation (up to 2 groups, 4 ports per group), loopback detection, 802.3x flow control, port mirroring (one-to-one, many-to-one), port statistics, LLDP, 802.3az EEE
SecurityPort isolation, storm control (broadcast, multicast, unknown unicast), physical security lock slot
Controller managementOmada Cloud-Based, Hardware and Software Controller (built-in version 6.1.0 or later); Omada app
Communication notesWeb GUI, DHCP client, cable diagnostics, LLDP, IGMP v1/v2/v3 snooping with fast leave, port-based/802.1p/DSCP QoS with 8 queues and WRR, ONVIF in controller mode
CoolingFanless
Surge protection±6 kV common mode on Ethernet ports
MountingDesktop or wall mount
Dimensions6.2 x 4.0 x 1.0 in (158 x 100.7 x 25.4 mm)
Operating temp23°F to 113°F (-5°C to 45°C)
Operating humidity10 to 90% RH, non-condensing
ComplianceFCC, CE
Package contentsES208G, power adapter, mounting feet, installation guide

Documents and resources

FAQs

Does the ES208G have PoE?
No. All eight ports are data only. For PoE, see the ES208GP, or use PoE injectors.
Does it need an Omada controller?
No. It runs standalone from its web interface. A controller adds centralized management, and the cloud controller adds zero-touch provisioning.
Does it support VLANs?
Yes. 802.1Q tag VLAN with up to 32 VLAN groups, plus port isolation. It is a Layer 2 Easy Managed switch.
Is it loud?
No. It is fanless, so it is silent on a desk or wall.
Can it be wall mounted?
Yes. It mounts on a wall or sits on a desk, and the package includes mounting feet.