TP-Link

Omada 8-Port Gigabit Smart PoE+ Switch, 4 PoE+ Ports, 62 W, Desktop or Wall Mount

SKU TPL-SG2008P Model SG2008P

  • 8 Gigabit ports, four of them 802.3af/at PoE+ from a 62 W budget
  • Perpetual PoE and Fast PoE keep cameras up through a switch reboot
  • VLANs, ACLs, 802.1X and static routing in a fanless steel case
  • Managed in Omada with zero-touch provisioning, or standalone by web UI and CLI
  • Fast shipping from four branches
  • 30-day returns on unopened products

Product highlights

  • Ports8 x Gigabit, 4 with PoE+
  • PoE62 W, 802.3af/at
  • MountDesktop or wall
  • Size8.2 x 4.9 x 1.0 in

The Omada SG2008P is an 8-port Gigabit Smart switch with four PoE+ ports and a 62 W budget, sized for a small job with a few cameras, an access point or phones. It manages in the same Omada site as the gateway and APs, with VLANs and ACLs for keeping camera traffic separate.

Built for small camera and wireless jobs

Ports 1 to 4 are 802.3af/at PoE+, with Perpetual PoE keeping devices powered through a switch reboot and Fast PoE bringing them up before the switch finishes booting. Ports 5 to 8 are data only. The fanless steel case sits on a desk or mounts on a wall, with a lock slot for physical security.

Key features

  • 4 PoE+ ports, 62 W total: 802.3af/at for cameras, APs and IP phones
  • Perpetual and Fast PoE: devices stay powered through a switch reboot and power up early on a cold start
  • VLANs, ACLs and 802.1X: to keep camera, voice and guest traffic apart
  • Fanless steel case: silent in an office, desktop or wall mount
  • Omada management: zero-touch provisioning and batch firmware upgrades through the cloud controller

System requirements

Uses the included 53.5V DC external power adapter. Powered devices must be 802.3af or 802.3at compliant. Centralized management needs an Omada Cloud-Based Controller (firmware 5.15.22 or later), Omada hardware controller or Omada Software Controller (5.15.20 or later); zero-touch provisioning needs the cloud controller. Without a controller the switch runs standalone from its own web interface and CLI.

Specifications

SKUTPL-SG2008P
BrandTP-Link
Form factor8-port Gigabit Smart PoE+ switch, desktop or wall mount
CommunicationEthernet / IP
Power inputExternal adapter, 53.5V DC / 1.31A (included)
Power consumption74.7 W max at 110V with 62 W of PoE load
ManagementSmart
PoE802.3af PoE
PoE802.3at PoE+
Port speedGigabit
Works withOmada
Ethernet ports8 x Gigabit RJ45 (ports 1-4 PoE+)
PoE budget62 W total
PoE featuresPerpetual PoE, Fast PoE
Switching capacity16 Gbps
Packet forwarding rate11.90 Mpps
MAC address table8K
Jumbo frame9 KB
VLANs4K 802.1Q VLAN groups, MAC, protocol and voice VLAN, GVRP
L2+ features32 IPv4/IPv6 static routes, DHCP server and relay, link aggregation with LACP, STP/RSTP/MSTP, loopback detection
Security802.1X, RADIUS AAA, ACLs, DHCP snooping, ARP inspection, port security, storm control
Controller managementOmada Cloud-Based (v5.15.22+), hardware or Software Controller (v5.15.20+); Omada app
Communication notesWeb GUI, CLI through Telnet, SNMP v1/v2c/v3, RMON, LLDP/LLDP-MED, IGMP snooping, IPv6
CoolingFanless
Surge protection±6 kV
MountingDesktop or wall mount
Dimensions8.2 x 4.9 x 1.0 in (209 x 126 x 26 mm)
Operating temp23°F to 104°F (-5°C to 40°C)
Operating humidity10 to 90% RH, non-condensing
ComplianceFCC, CE
Package contentsSG2008P, power adapter, power cord, mounting feet, installation guide

Documents and resources

FAQs

How many ports on the SG2008P have PoE?
Four. Ports 1 to 4 are 802.3af/at PoE+ sharing a 62 W budget; ports 5 to 8 are data only.
Will cameras lose power when the switch reboots?
No. Perpetual PoE keeps power on the ports during a switch reboot, and Fast PoE powers devices on a cold start before the switch finishes booting.
Does it need an Omada controller?
No. It runs standalone from its web interface and CLI. An Omada controller adds centralized management, and the cloud controller adds zero-touch provisioning.
Can it route between VLANs?
Yes. It has 32 IPv4/IPv6 static routes and a DHCP server, so it can route between camera, voice and data VLANs without a separate router for small sites.
Is it loud?
No. It is fanless, so it is silent on a desk or wall.