TP-Link

Omada Pro 8-Port Gigabit Smart PoE+ Switch, 4 PoE+ Ports, 62 W, Static Routing

SKU TPL-S4500-8GP Model S4500-8GP

  • Four 802.3af/at PoE+ ports from a 62 W budget, plus four data-only Gigabit ports
  • L2+ features: 32 static routes, DHCP server, 4K VLAN groups, voice and protocol VLANs
  • ACLs, 802.1X with RADIUS, DHCP snooping, ARP inspection and port security
  • Managed in Omada Pro, with zero-touch provisioning through the Pro cloud controller
  • Fast shipping from four branches
  • 30-day returns on unopened products

Product highlights

  • Ports8 x Gigabit, 4 with PoE+
  • PoE62 W, 802.3af/at
  • MountDesktop or wall
  • Size8.2 x 4.9 x 1.0 in
  • ConnectivitySmart, Omada Pro managed

The Omada Pro S4500-8GP is an eight-port Gigabit Smart switch with four PoE+ ports and a 62 W budget, enough for a few cameras or access points at a small site, with static routing and ACLs and Omada Pro management. It is fanless and mounts on a desk or wall.

Built for small camera and Wi-Fi sites

Ports 1 to 4 deliver 802.3af/at PoE+ at up to 30 W from a 62 W budget, and ports 5 to 8 carry data only. Static routing (32 IPv4/IPv6 routes), a DHCP server and 802.1Q, MAC, protocol and voice VLANs let it route between camera, voice and data segments. Security covers 802.1X with RADIUS, ACLs, DHCP snooping and ARP inspection, and dual image gives safer firmware upgrades.

Key features

  • 4 PoE+ ports, 62 W total: 802.3af/at for cameras, APs and phones, ports 5 to 8 data only
  • Static routing and DHCP server: 32 IPv4/IPv6 static routes and 16 IP interfaces for inter-VLAN routing
  • ACLs and 802.1X: up to 230 ACL entries, RADIUS authentication and per-port MAC limits
  • Fanless, desktop or wall mount: silent in an office or closet
  • Omada Pro management: Omada app, batch config and firmware upgrades, and zero-touch provisioning through the Pro cloud controller

System requirements

Uses a 53.5V DC / 1.31 A power adapter. Powered devices must be 802.3af or 802.3at compliant. Centralized management needs an Omada Pro Cloud-Based or Omada Pro Software Controller; zero-touch provisioning needs the Pro cloud controller. Without a controller the switch runs standalone from its web GUI and CLI.

Specifications

SKUTPL-S4500-8GP
BrandTP-Link
Form factor8-port Gigabit Smart PoE+ switch, desktop or wall mount
CommunicationEthernet / IP
Power inputExternal adapter, 53.5V DC / 1.31 A
Power consumption77.3 W max at 110V with 62 W of PoE load
ManagementSmart
PoE802.3af PoE
PoE802.3at PoE+
Port speedGigabit
Works withOmada Pro
Ethernet ports8 x Gigabit RJ45 (ports 1-4 PoE+)
PoE budget62 W total, up to 30 W per port
Switching capacity16 Gbps
Packet forwarding rate11.90 Mpps
MAC address table8K
Jumbo frame9 KB
VLANs802.1Q tag VLAN (up to 4K VLAN groups), MAC VLAN (12 entries), protocol VLAN, GVRP, voice VLAN, OUI-based VLAN
L2+ features16 IP interfaces (IPv4/IPv6), 32 static routes, DHCP server and relay, static ARP, LACP link aggregation (8 groups of 8 ports), STP/RSTP/MSTP, loopback detection, port mirroring, DLDP
Security802.1X with RADIUS, AAA, ACLs (up to 230 entries), DHCP snooping, ARP inspection, IP source guard, port security (64 MACs per port), storm control, HTTPS and SSH management
Controller managementOmada Pro Cloud-Based or Software Controller; Omada app and cloud access through the Omada Pro controller
Communication notesWeb GUI, CLI via console port and Telnet, SNMP v1/v2c/v3, RMON, dual image and dual configuration, IPv6, 802.1p/DSCP QoS with 8 queues, IGMP and MLD snooping
CoolingFanless
MountingDesktop or wall mount
Dimensions8.2 x 4.9 x 1.0 in (209 x 126 x 26 mm)
Operating temp32°F to 104°F (0°C to 40°C)
Operating humidity10 to 90% RH, non-condensing
ComplianceCE, FCC
Package contentsS4500-8GP, power cord, installation guide, rubber feet

Documents and resources

FAQs

How many ports on the S4500-8GP have PoE?
Four. Ports 1 to 4 are 802.3af/at PoE+ sharing a 62 W budget; ports 5 to 8 are data only.
How many cameras can the S4500-8GP power?
The four PoE+ ports share 62 W. Divide 62 W by each camera's max draw, up to 30 W per port, to size the job.
Can it route between VLANs?
Yes. It supports 32 IPv4/IPv6 static routes, 16 IP interfaces and a DHCP server, so it can route between local VLANs.
Does it need an Omada Pro controller?
No. It runs standalone from its web GUI and CLI. An Omada Pro controller adds central management, and the Pro cloud controller adds zero-touch provisioning.
Is the S4500-8GP fanless?
Yes. It has no fan, so it is silent on a desk or wall.