The NSW3000-8T2GT-PoE-IN is an 8-port managed PoE switch with two Gigabit RJ45 uplinks. It provides 120W of total PoE power across eight 10/100Mbps ports, delivering up to 30W per port for IP cameras, access points, and other IEEE 802.3af/at devices.
Layer 2 management covers VLANs (up to 32), port mirroring, loop detection, link aggregation on the uplink ports, and QoS with broadcast storm control. An extend mode pushes PoE reach to 250m at 10Mbps for long cable runs. Configurable through a web interface, cloud platform, or mobile app. Fanless all-metal enclosure. NDAA-compliant per manufacturer specification.
- 120W total PoE budget, 30W per port (IEEE 802.3af/at)
- Extend mode reaches 250m at 10Mbps for long cable runs
- Fanless all-metal enclosure - no moving parts, silent operation
- Web, cloud, and mobile app management
- NDAA-compliant per manufacturer specification
- 5.6 Gbps switching capacity, 4.17 Mpps forwarding rate
Brand:
Uniview
Power Source:
AC 100-240V, 50/60Hz
PoE Standard:
IEEE 802.3af, IEEE 802.3at
PoE Budget:
120W total, 30W per port
Certifications:
NDAA-compliant (per manufacturer)
Compatibility:
IEEE 802.3, IEEE 802.3u, IEEE 802.3az, IEEE 802.3x
Ports:
8 x 10/100Mbps PoE (RJ45), 2 x Gigabit (RJ45)
Switching Capacity:
5.6 Gbps
Forwarding Rate:
4.17 Mpps
MAC Address Table:
4K
Packet Buffer:
2 Mbit
Max Power:
130W
PoE Mode:
Mode A (1/2, 3/6), Mode B (4/5, 7/8)
VLAN Support:
Up to 32 VLANs, IDs 1-4094
Cooling:
Fanless (passive)
Operating Temperature:
32Ā°F to 113Ā°F (0Ā°C to 45Ā°C)
Operating Humidity:
5% to 90% RH, noncondensing
Dimensions:
6.7" x 5.2" x 1.6" (169 x 132 x 40mm)
Weight:
1.48 lbs (0.67 kg)
