8-Port PoE Cloud Managed Gigabit Switch (PoE++)
SKU LM-SML-10GPA
- Fast shipping from four branches
- 30-day returns on unopened products
The Luminys SML-10GPA delivers cloud-managed PoE switching for small-to-mid camera installs without the cost or complexity of enterprise gear. Eight Gigabit PoE ports (including one 90W PoE++ port for power-hungry PTZ cameras and multi-sensor units) pair with a built-in PoE Watchdog that auto-reboots unresponsive cameras without a truck roll.
Built for the commercial installer
NDAA Section 889 compliant and FCC Part 15 Subpart B certified, it clears compliance requirements on government and commercial bids. LumiPoE extends the PoE signal up to 820 ft at 10 Mbps on CAT5e/CAT6 for perimeter cameras where pulling additional cable isn't an option. LumiCloud remote management is included at no charge, letting you check port status and reboot devices without driving back to the site.
Key features
- PoE Watchdog: automatically detects and reboots unresponsive cameras. No manual intervention required on remote sites.
- 90W PoE++ on Port 1: runs PTZ cameras, multi-sensor units, and other high-draw endpoints without a midspan
- LumiCloud management included free: remote port monitoring and control via web or app without an on-site visit
- LumiPoE extended range: push PoE up to 820 ft (250 m) at 10 Mbps for long cable runs on perimeter cameras
- NDAA Section 889 compliant: cleared for government contracts and federal procurement bids
- Compact desktop chassis: 7.5 x 4.2 x 1.2 in., fits in IDF closets, small equipment rooms, or above-ceiling installs
System requirements
Connects to your existing network via two Gigabit RJ-45 uplink ports. Powered by the included external 54 VDC power supply. Basic LumiCloud remote access is free - no subscription required for core management.
Specifications
| SKU | LM-SML-10GPA |
|---|---|
| Brand | Luminys |
| Form factor | Layer 2 desktop Gigabit switch, metal chassis |
| PoE ports | 8 x 10/100/1000 Mbps (PoE/PoE+/PoE++) |
| Uplink ports | 2 x 10/100/1000 Mbps RJ-45 |
| PoE standards | IEEE802.3af, IEEE802.3at (PoE+), IEEE802.3bt (PoE++) |
| Network standards | IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3ab, IEEE802.3z |
| PoE port power | Port 1: up to 90W (PoE++); Ports 2-8: up to 30W each (PoE+) |
| Total PoE budget | 110W |
| Switching capacity | 20 Gbps |
| Packet forwarding rate | 14.8 Mpps |
| Packet buffer | 4.1 Mbit |
| MAC table size | 8,000 entries |
| MTBF | 127.3 years |
| Long range PoE | Up to 820 ft (250 m) at 10 Mbps on PoE ports |
| VLAN support | Port-based, up to 32 VLANs |
| Storm control | Unknown Unicast, Multicast, Broadcast |
| Port mirroring | Supported |
| Port isolation | Supported |
| LLDP | Supported |
| DHCP | Client |
| Management | Web-based and LumiCloud cloud-based |
| Power supply | 54 VDC, 2.22A, external (included) |
| Power consumption | Idle: 6W; Max: 110W |
| Surge protection | Power port: 4kV/2kV; Telecom port: 8kV |
| Operating temp | -10 to 55°C (14 to 131°F); 5-95% RH non-condensing |
| Storage temp | -40 to 70°C (-40 to 158°F); 5-95% RH non-condensing |
| Dimensions | 190 x 106 x 30 mm (7.5 x 4.2 x 1.2 in.) |
| Net weight | 0.6 kg (1.2 lb) |
| Material | Metal |
| Compliance | NDAA Section 889, FCC Part 15 Subpart B |
Documents and resources
FAQs
Does the SML-10GPA require a subscription to use LumiCloud management?
What is the maximum PoE wattage per port?
How does PoE Watchdog work?
Is the SML-10GPA NDAA compliant?
How far can the switch extend PoE signal?
How many VLANs does this switch support?
What power supply does the switch require?
More in PoE Switches
All PoE Switches-
Uniview
Uniview | 6-Port Gigabit Cloud Managed PoE Switch | NSW2100-6GT-PoE-IN
UNV-NSW2100-6GT-POE-IN
