4-Port PoE Cloud Managed Gigabit Switch (PoE+)
Luminys

4-Port PoE Cloud Managed Gigabit Switch (PoE+)

SKU LM-SML-6GPA

New to SS&Si? Apply for a dealer account
Share
  • Fast shipping from four branches
  • 30-day returns on unopened products
Questions? Call us 866-364-0030The SS&Si dealer team

The Luminys SML-6GPA puts four PoE+ ports and cloud management in a compact metal enclosure sized for tight wiring closets and IDF spaces. Push power and data to cameras and access control readers up to 820 ft away -- no media converter, no second run -- and manage the whole network from a browser or the Luminys cloud portal without touching the site.

Built for the security installer

NDAA Section 889 compliant and rated to 55°C, the SML-6GPA handles camera runs that would choke a consumer switch. Intelligent PoE prioritization keeps critical devices online during brownouts, and the built-in PoE Watchdog automatically power-cycles unresponsive cameras -- cutting truck rolls without a support ticket. Surge protection on both power and telecom ports (4 kV / 8 kV) protects the investment on outdoor and exposed runs.

Key features

  • 60W total PoE budget across four PoE/PoE+ ports (up to 30W per port, IEEE 802.3at)
  • Extended reach to 820 ft (250 m) at 10 Mbps -- outrun standard 100m cable limits on long camera runs
  • PoE Watchdog detects and power-cycles unresponsive cameras automatically, no truck roll required
  • Cloud + web management for remote configuration and monitoring without a site visit
  • Port isolation and VLAN support for segmenting camera traffic from the main LAN
  • NDAA Section 889 compliant for government and critical infrastructure projects
  • Built-in surge protection on power and telecom ports for outdoor and exposed cable runs

Deployment requirements

The SML-6GPA requires an external 53 VDC power supply. Connect the two uplink RJ-45 ports to the head-end switch or NVR network. PoE ports 1-4 are IEEE 802.3af/at compatible -- pair with any standard IP camera, access reader, or PoE-powered device. CAT5e or CAT6 required; keep DC loop resistance under 10 ohm/100m for reliable extended-distance runs.

Specifications

SKULM-SML-6GPA
BrandLuminys
Form factorLayer 2 managed switch, metal enclosure, desktop/wall
PoE ports4 x 10/100/1000 Mbps RJ-45, IEEE 802.3af/at (PoE+)
Uplink ports2 x 10/100/1000 Mbps RJ-45
PoE budget60W total; up to 30W per port
Extended reachUp to 820 ft (250 m) at 10 Mbps
Switching capacity12 Gbps
Forwarding rate8.9 Mpps
MAC table8,000 entries
VLANPort-based, up to 32 VLANs
ManagementWeb browser (local) and cloud portal
Power input53 VDC, 1.226 A, external power supply
Power consumption2.5W idle; 65W max
Surge protection4 kV (power port); 8 kV (telecom port)
Operating temp14 to 131°F (-10 to 55°C)
Operating humidity5 to 95% RH, non-condensing
Dimensions5.1 x 3.5 x 1.0 in. (130 x 90 x 26 mm)
Net weight0.6 lb (0.3 kg)
ComplianceNDAA Section 889, FCC Part 15 Subpart B

Documents and resources

FAQs

How far can I run a camera from this switch?
Up to 820 ft (250 m) at 10 Mbps using IEEE 802.3at PoE+ mode. Standard Gigabit operation stays within the typical 328 ft (100 m) spec. Actual range varies with cable quality and connected device power draw.
What is the total PoE power budget?
60W shared across all four PoE ports, with up to 30W (IEEE 802.3at) available per port. Plan your camera and device wattage before the install -- the switch enforces the budget automatically.
What happens when a camera stops responding?
The built-in PoE Watchdog detects unresponsive devices and automatically power-cycles the affected port. No manual reboot, no truck roll required.
Does this work with ONVIF cameras and standard NVRs?
Yes. The PoE ports are IEEE 802.3af/at standard and work with any compliant IP camera, NVR, or access control reader regardless of brand. No proprietary lock-in.
Is this switch NDAA Section 889 compliant?
Yes. The SML-6GPA is NDAA Section 889 compliant, making it suitable for government facilities, schools, and critical infrastructure projects with federal compliance requirements.
Can I segment camera traffic from the rest of the network?
Yes. The switch supports port-based VLAN (up to 32 VLANs) and port isolation to keep camera traffic separated from corporate LAN traffic. Configure via the web interface or cloud portal.
What cable type is required for extended-distance runs?
CAT5e or CAT6. Keep the DC loop resistance under 10 ohm per 100 m for reliable power delivery on long runs. Lower-quality or older cable will reduce effective PoE reach.
All PoE Switches