The NSW2100-6GT-PoE-IN is a 6-port gigabit PoE switch with four 802.3af/at PoE ports and two gigabit RJ45 uplinks. Total PoE budget is 65W, with up to 30W available per port. Fanless design in an all-metal enclosure - no moving parts, no noise, no maintenance.
Supports 250-meter extended PoE transmission in extend mode (10Mbps), VLAN isolation, loop detection, and port priority for managed power distribution. Manageable via web interface or cloud app. Not NDAA-compliant.
- 65W total PoE budget across 4 gigabit ports (30W max per port, IEEE 802.3af/at)
- 2 gigabit RJ45 uplink ports for backbone connectivity
- 250m extended PoE reach in extend mode for long cable runs
- Fanless, all-metal chassis - installs in closets and ceiling spaces without ventilation concerns
- VLAN isolation, loop detection, and port mirroring for basic L2 network management
- Cloud or web-based management with real-time device monitoring
Brand:
Uniview
PoE Standard:
IEEE 802.3af, IEEE 802.3at
Power Source:
AC 100-240V, 50/60Hz
Max PoE Power:
65W total; 30W per port
PoE Ports:
4x 10/100/1000Mbps RJ45
Uplink Ports:
2x 10/100/1000Mbps RJ45
Switching Capacity:
12Gbps
Forwarding Performance:
8.92Mpps
MAC Address Table:
2K
Network Standards:
IEEE 802.3, 802.3u, 802.3z, 802.3ab, 802.3x, 802.3af, 802.3at
Certifications:
CE, FCC, RoHS; NOT NDAA-compliant
VLAN Support:
Up to 6 VLANs, IDs 1-4094
Link Aggregation:
2 groups (up to 4 ports)
Loop Detection:
Yes
Port Mirroring:
N:1
Extended PoE Range:
250m (10Mbps in extend mode)
Cooling:
Fanless (passive)
Operating Temperature:
32Ā°F to 104Ā°F (0Ā°C to 40Ā°C)
Operating Humidity:
10% to 90% (non-condensing)
Dimensions:
6.7 x 5.2 x 1.6 in (169 x 132 x 40mm)
Weight:
1.43 lbs (0.65kg)
Max Power Consumption:
70W
