The K-FSRA10 gives building staff a full status picture of a Kidde fixed fire suppression system from a secondary location, without needing to stand at the suppression cylinder or control head. Ten bi-color LEDs show active zones, with ten additional yellow LEDs dedicated to zone trouble conditions.
Built for the commercial fire installer
System-level LEDs for power, alarm, trouble, supervisory, and ground fault round out the panel, so a single annunciator communicates the full health of the suppression system. The serial annunciator bus runs up to 1,000 feet on untwisted, non-shielded 18 AWG cable, and up to three annunciator modules can share a single trim plate on a standard 4-inch square electrical box for multi-zone or multi-system installs.
Key features
- 10 bi-color zone LEDs (red/yellow) for active zone indication
- 10 dedicated trouble LEDs for zone-level fault reporting
- System status LEDs for power, alarm, trouble, supervisory, and ground fault
- Long serial bus run: up to 1,000 ft (305 m) on 18 AWG untwisted, non-shielded cable
- Stackable: up to three annunciator modules share one trim plate on a standard 4-inch square box
- English overlay labeling
System requirements
Compatible with Kidde FSP1004RD fire suppression release panels. Mounts to a standard North American 4-inch square electrical box.
