The GSA-M270 is a single action, single stage manual pull station for Kidde commercial fire alarm systems. One pull drops the handle and latches it in the alarm position, giving responding personnel and the technician an unambiguous visual indication of which station was operated.
Built for the commercial fire installer
Single action operation is what most jurisdictions call for in ordinary commercial occupancies: one motion to initiate, no lift-then-pull sequence. The latched handle stays down until the station is reset with a key, so a walked-down building tells you where the alarm originated before you get back to the panel. Listed by UL, ULC, CSFM, FM, FDNY, MEA, and CB.
Key features
- Single action operation: one pull initiates the alarm, meeting the standard requirement for commercial occupancies
- Single stage: one alarm condition, for systems that do not use a two-stage alert and evacuate sequence
- Latching handle: the operated station stays visibly tripped until it is key reset
- Broad agency approval: UL, ULC, CSFM, FM, FDNY, MEA, and CB listed for use across North American jurisdictions
System requirements
For use with compatible Kidde commercial fire alarm control panels. Confirm the station matches the initiating circuit type and staging arrangement of the panel it is being installed on. If the system uses a two-stage sequence, order the two-stage GSA-M270P instead.
