You save

Kidde | Genesis WG4 Series Outdoor Rated Speaker, Dual-Voltage 25V/70V, White, No Marking | EWGSWN

No reviews yet Write a Review
SKU:
KD-EWGSWN

The Genesis WG4 outdoor rated speaker delivers fire alarm and mass notification audio in wet and harsh environments where standard indoor appliances won't hold up. Rated from -31F to 151F with 0-95% humidity tolerance, it mounts on walls or ceilings in parking garages, loading docks, covered walkways, and exterior corridors without a separate weatherproof enclosure.

Built for the commercial installer

Dual-voltage operation (25 VRMS or 70 VRMS, switch-selectable) and four field-selectable wattage taps ( , , 1, and 2 W) mean one SKU covers a range of NAC circuit designs without stocking multiple models. All wiring connections are room-side, so there's no reaching behind the box during rough-in or trim. Mount to a standard 4" square box for dry environments or the Kidde 74347U surface box for wet locations. UL 1480-listed.

Key features

  • Indoor/outdoor rated: wet-location listed, -31F to 151F operating range, 0-95% humidity tolerance
  • Dual-voltage, four wattage taps: field-selectable 25 VRMS or 70 VRMS with , , 1, or 2 W output (80.8 to 90.0 dBA)
  • Room-side wiring: all connections made from the front face, 12 to 18 AWG
  • Wall or ceiling mount: standard 4" square box (dry) or Kidde 74347U surface box (wet)
  • Genesis sync compatible: synchronizes with Genesis-protocol FACPs and sync modules
  • Low-profile design: compact white housing blends into commercial environments

System requirements

Connects to a supervised amplified speaker circuit (NAC) from a compatible Kidde FACP or booster power supply. Requires two-conductor wiring (12 to 18 AWG). For outdoor or wet-location installations, use the Kidde 74347U surface mount box.

Brand:
Kidde Commercial
Form factor:
Wall/ceiling mount outdoor speaker, Genesis WG4 Series
Speaker voltage:
25 VRMS or 70 VRMS, switch-selectable (default 70 VRMS)
Speaker wattage:
¼, ½, 1, or 2 W, field-selectable
Sound output:
80.8 to 90.0 dBA at 10 ft (UL reverberant)
Frequency response:
400 to 4,000 Hz
Supervisory voltage:
30 V max
Wire size:
12 to 18 AWG (0.75 to 2.50 mm²)
Operating temp:
-31 to 151°F (-35 to 66°C)
Operating humidity:
0 to 95% noncondensing
Operating environment:
Wet (indoor/outdoor)
Mounting:
Wall or ceiling; 4" square by 1-1/2" deep box (dry) or Kidde 74347U (wet)
Housing color:
White
Marking:
None
Compliance:
UL 1480
Does this speaker work outdoors?
Yes. The Genesis WG4 is rated for wet locations with an operating range of -31°F to 151°F and 0-95% humidity tolerance. For outdoor installations, mount to the Kidde 74347U surface box.
What voltage does this speaker operate on?
Dual-voltage: 25 VRMS or 70 VRMS, switch-selectable on the device. Ships defaulted to 70 VRMS.
What wattage taps are available?
Four field-selectable settings: ¼ W, ½ W, 1 W, and 2 W. Sound output ranges from 80.8 to 90.0 dBA at 10 ft depending on the tap selected.
What electrical box does this require for outdoor installation?
Use the Kidde 74347U surface mount box for wet/outdoor locations. For dry interior locations, a standard 4" square by 1-1/2" deep electrical box works.
Can this be wall and ceiling mounted?
Yes. The WG4 mounts in either orientation. Wall mount and ceiling mount use the same hardware and wiring connections.
Is this compatible with my existing Kidde FACP?
Works with Kidde VM/VS Series, FX Series, and other FACPs supporting Genesis sync. Compatible modules: GSA-CC1S, GSA-MCC1S, SIGA-CC2A. Power supplies: APS6A, APS10A, MIRBPS6A, MIRBPS10A.

Spec Sheet