TP-Link

10-Port Gigabit Desktop PoE++ Switch with 2 PoE++ and 6 PoE+ Ports, 123 W, Combo SFP

SKU TPL-TL-SG1210PP Model TL-SG1210PP

  • Two 802.3bt PoE++ ports and six 802.3af/at PoE+ ports on a 123 W budget
  • Extend mode runs PoE and data to 250 m on ports 1 to 4 for long camera runs
  • One combo SFP/RJ45 port gives a fiber or copper uplink on the same switch
  • Unmanaged and fanless, so it is plug and play with nothing to configure
  • Fast shipping from four branches
  • 30-day returns on unopened products

Product highlights

  • Ports9 x Gigabit RJ45, 1 combo SFP
  • PoE2 PoE++, 6 PoE+, 123 W
  • RangeExtend mode to 250 m
  • Size8.2 x 5.0 x 1.0 in, fanless

The TL-SG1210PP is an unmanaged 10-port Gigabit desktop switch with two 802.3bt PoE++ ports and six PoE+ ports on a 123 W budget. It covers the odd job that mixes a high-power PTZ or AP with a few standard cameras, with no configuration.

Built for mixed-power camera and AP jobs

Ports 1 and 2 comply with 802.3af/at/bt for higher-draw devices, and ports 3 to 8 comply with 802.3af/at. A combo SFP/RJ45 port gives a fiber or copper uplink. Extend mode on ports 1 to 4 reaches 250 m, priority mode covers ports 1 and 2, and PoE Auto Recovery watches ports 1 to 8. The fanless steel case stays quiet.

Key features

  • 2 PoE++ and 6 PoE+ ports, 123 W total: 802.3bt on ports 1-2, 802.3af/at on ports 3-8
  • Extend mode to 250 m: on ports 1 to 4 for long camera runs
  • Combo SFP/RJ45 port: for a fiber or copper uplink
  • PoE Auto Recovery: restarts a frozen PoE device on ports 1 to 8
  • Plug and play: unmanaged and fanless, nothing to configure

System requirements

None. Uses the included 53.5V DC external power adapter. Powered devices must be 802.3af, 802.3at or (ports 1 and 2 only) 802.3bt compliant.

Specifications

SKUTPL-TL-SG1210PP
BrandTP-Link
Form factor10-port Gigabit unmanaged desktop PoE++ switch
CommunicationEthernet / IP
Power inputExternal adapter, 53.5V DC / 2.43A (included)
Power consumption144.1 W max at 220V with 123 W of PoE load
ManagementUnmanaged
PoE802.3af PoE
PoE802.3at PoE+
PoE802.3bt PoE++
Port speedGigabit
Ethernet ports9 x Gigabit RJ45 (ports 1-2 PoE++, ports 3-8 PoE+)
SFP slots1 x Gigabit combo SFP/RJ45
PoE budget123 W total
PoE featuresExtend mode to 250 m on ports 1-4, priority mode on ports 1-2, isolation mode, PoE Auto Recovery on ports 1-8
Switching capacity20 Gbps
Packet forwarding rate14.88 Mpps
MAC address table4K
Communication notes802.3x flow control, 802.1p/DSCP QoS, IGMP snooping
CoolingFanless
MountingDesktop
Dimensions8.2 x 5.0 x 1.0 in (209 x 126 x 26 mm)
Operating temp32°F to 104°F (0°C to 40°C)
Operating humidity10 to 90% RH, non-condensing
ComplianceFCC, CE
Package contentsTL-SG1210PP, power adapter, installation guide

FAQs

Which ports on the TL-SG1210PP support PoE++?
Ports 1 and 2 comply with 802.3af/at/bt. Ports 3 to 8 are 802.3af/at PoE+.
How many devices can it power?
Eight PoE ports share a 123 W budget. Divide 123 W by each device's max draw to size the job.
Can it reach a camera more than 100 m away?
Yes. Extend mode on ports 1 to 4 carries PoE and data up to 250 m.
Does this switch need to be configured?
No. It is unmanaged and works out of the box, with no web interface or VLAN support.
What does the combo port do?
It is a combo 1000 Mbps SFP/RJ45 port, usable as a fiber or copper uplink.