Omada 6-Port 10/100 Mbps Unmanaged Desktop PoE+ Switch with 4 PoE+ Ports, 67 W
SKU TPL-DS106P Model DS106P
- Six 10/100 Mbps ports, four of them 802.3af/at PoE+ from a 67 W budget
- Extend mode runs PoE and data to 250 m, with port speed dropping to 10 Mbps
- Priority mode on ports 1-2 and PoE auto recovery on ports 1-4
- Unmanaged and fanless, plug and play with nothing to configure
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports6 x 10/100, 4 with PoE+
- PoE67 W, 802.3af/at
- RangeExtend mode to 250 m
- Size6.2 x 4.0 x 1.0 in, fanless
The DS106P is an unmanaged 6-port 10/100 Mbps desktop switch with four PoE+ ports, the low-cost way to power a few IP cameras, an AP or phones where Gigabit speed is not needed. Plug it in and it works: no software and no fan noise.
Built for small, budget camera and phone jobs
Ports 1 to 4 deliver 802.3af/at PoE+ at up to 30 W each from a 67 W shared budget, and ports 5 and 6 carry data only. Extend mode pushes PoE and data out to 250 m with the link dropping to 10 Mbps, priority mode protects ports 1 and 2, and PoE auto recovery restarts a powered device that stops responding.
Key features
- 4 PoE+ ports, 67 W total: 802.3af/at for cameras, APs and IP phones
- Extend mode to 250 m for cameras past the 100 m limit
- Priority mode: protects traffic on ports 1-2
- PoE auto recovery: restarts a frozen PoE device on ports 1-4
- Plug and play: unmanaged and fanless, nothing to configure
System requirements
None. Uses the included 53.5 V DC external power adapter. Powered devices must be 802.3af or 802.3at compliant.
Specifications
| SKU | TPL-DS106P |
|---|---|
| Brand | TP-Link |
| Form factor | 6-port 10/100 Mbps unmanaged desktop PoE+ switch |
| Communication | Ethernet / IP |
| Power input | External adapter, 53.5 V DC / 1.31 A (included) |
| Power consumption | 75.4 W max with 67 W of PoE load |
| Management | Unmanaged |
| PoE | 802.3af PoE |
| PoE | 802.3at PoE+ |
| Port speed | Fast Ethernet |
| Ethernet ports | 6 x 10/100 Mbps RJ45 (ports 1-4 PoE+) |
| PoE budget | 67 W total, up to 30 W per port |
| PoE features | Extend mode to 250 m on ports 1-4, priority mode on ports 1-2, PoE auto recovery on ports 1-4 |
| Switching capacity | 1.2 Gbps |
| Packet forwarding rate | 0.8928 Mpps |
| MAC address table | 2K |
| Jumbo frame | 2 KB |
| Controller management | Not supported. Omada unmanaged switches do not support Omada SDN central management. |
| Communication notes | 802.3x flow control (backpressure in half duplex), auto MDI/MDIX, MAC auto-learning and auto-aging |
| Cooling | Fanless |
| Security | Physical security lock slot |
| Mounting | Desktop |
| Dimensions | 6.2 x 4.0 x 1.0 in (158 x 101 x 25 mm) |
| Operating temp | 32°F to 104°F (0°C to 40°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE, RoHS |
| Package contents | DS106P, power adapter, installation guide |
Documents and resources
FAQs
How many ports on the DS106P have PoE?
Four. Ports 1 to 4 are 802.3af/at PoE+ up to 30 W each, sharing a 67 W budget. Ports 5 and 6 are data only.
Is the DS106P Gigabit?
No. All six ports are 10/100 Mbps. Choose a Gigabit model if the uplink or devices need more than 100 Mbps.
Can it reach a camera more than 100 m away?
Yes. Extend mode carries PoE and data up to 250 m, and the port speed drops to 10 Mbps.
What does priority mode do?
It gives ports 1 and 2 high priority so sensitive traffic, such as a camera stream, is protected on the switch.
Does this switch need to be configured?
No. It is unmanaged and works out of the box. There is no web interface or VLAN support.
More in PoE Switches
All PoE Switches-
TP-Link
TP-Link | 8-Port Gigabit Desktop PoE+ Switch with 4 PoE+ Ports, 64 W, Unmanaged | TL-SG1008P
TPL-TL-SG1008P
