• SS&Si
  • Intrusion
  • Versa | Z-Wave 800 Long Range Plug-In Lamp Dimmer, Alarm.com Approved, 200W Incandescent / 100W Dimmable LED with SmartStart and S2 | LAMP-ZW2
Z-Wave 800 Long Range Plug-In Lamp Dimmer, Alarm.com Approved, 200W Incandescent / 100W Dimmable LED with SmartStart and S2
  • Wireless technology
Versa

Z-Wave 800 Long Range Plug-In Lamp Dimmer, Alarm.com Approved, 200W Incandescent / 100W Dimmable LED with SmartStart and S2

SKU VER-LAMP-ZW2

  • Z-Wave 800 Long Range plug-in dimmer for table and floor lamps, no wiring required
  • Officially Alarm.com approved for native control on dealer accounts
  • Dims 10 to 99 percent on 200W incandescent or 100W dimmable CFL/LED
  • SmartStart QR pairing with S2 security, and a configurable single and double tap level
New to SS&Si? Apply for a dealer account
Share
  • Fast shipping from four branches
  • 30-day returns on unopened products
Questions? Call us 866-364-0030The SS&Si dealer team

Product highlights

  • ProtocolZ-Wave 800 Long Range
  • RangeUp to 1300 ft direct, LR
  • Power200W incandescent, 100W LED
  • CompatibilityAlarm.com approved
  • ConnectivitySmartStart, S2 security
  • Warranty2 years

Pairs with

The Versa LAMP-ZW2 is a Z-Wave 800 Series Long Range plug-in lamp dimmer. It sits between a grounded indoor outlet and a lamp and turns that outlet into a dimmable one, with no wiring, no wall plate and no electrician. It is officially Alarm.com approved, so a dealer can add it to an Alarm.com account and control it natively, with no secondary app and no workaround.

A real dimmer, not just a smart plug

It sets a brightness level from 10 to 99 percent out of the box, on up to 200W incandescent or 100W dimmable CFL/LED, and parameters 11 and 12 move the bottom and top of that range for a stubborn bulb. The button carries two brightness levels of its own: a single tap from off lands on one level and a double tap lands on a night light level, both configurable through parameters. They work at the plug with no hub involved, so the lamp keeps doing it if the network goes down.

Setup is SmartStart. Scan the Z-Wave QR code on the back of the plug, power it up, and it joins within ten minutes. Long Range mode is a SmartStart join on an 800 Series controller with Long Range switched on. On classic mesh the plug also repeats for other mains-powered devices.

Key features

  • Z-Wave 800 Series with Long Range: up to 1300 ft direct to the controller, 330 ft (100 m) per hop on mesh
  • Alarm.com approved: native control on Alarm.com dealer accounts
  • True plug-in dimmer: 10 to 99 percent by default, 200W incandescent and 100W dimmable CFL/LED
  • Two brightness levels on the button: single tap and double tap are both configurable
  • SmartStart and S2: QR code pairing with S2 Authenticated and Unauthenticated security
  • Built-in repeater on classic mesh, and it works with older and newer Z-Wave devices
  • Power-loss memory and button lockout: useful for rentals and commercial jobs
  • Listed: ETL Listed by Intertek, FCC Part 15 Class B, Z-Wave certified

System requirements

Works with any Z-Wave certified controller. Versa lists Alarm.com, 2GIG EDGE, Qolsys IQ, SmartThings, Hubitat and Home Assistant with a Z-Wave 800 controller. For Long Range, pair it to an 800 Series Long Range controller with SmartStart. It needs a grounded 125VAC outlet and is for indoor, dry locations only. Do not use it with heaters, heat lamps or medical equipment.

Specifications

SKUVER-LAMP-ZW2
BrandVersa
Form factorPlug-in lamp dimmer
ProtocolZ-Wave 800 Series with Long Range, SmartStart, S2 Authenticated and Unauthenticated
RangeUp to 1300 ft direct to controller (Long Range), 330 ft (100 m) per hop (mesh)
Power input125VAC, 60Hz, grounded 3-wire plug
Load rating200W incandescent, 100W dimmable CFL/LED
Brightness range10 to 99 percent by default, adjustable with parameters 11 and 12
Configuration parameters20, all settable from the hub
Factory resetPress the button twice quickly, then hold the third press for 10 seconds
Installation environmentIndoor, dry locations only
Compatibility notesAlarm.com approved. Also listed with 2GIG EDGE, Qolsys IQ, SmartThings, Hubitat and Home Assistant. Works with any Z-Wave certified controller. Long Range needs an 800 Series controller.
ComplianceETL Listed by Intertek (UL 60730-1, CSA E60730-1), FCC Part 15 Class B, Z-Wave certified

Warranty

2 years

Documents and resources

FAQs

Is the LAMP-ZW2 Alarm.com approved?
Yes. It is officially Alarm.com approved, and dealers can add it to a customer account and control it natively. The approval is specific to the LAMP-ZW2, not other Versa Z-Wave devices.
Can a smart plug dim lights?
This one can. The LAMP-ZW2 sets a brightness level, so your hub sees a dimmer with a slider and not a toggle. The range is 10 to 99 percent as shipped, adjustable with parameters 11 and 12.
What bulbs and wattage does the LAMP-ZW2 support?
Up to 200W incandescent and up to 100W dimmable CFL/LED, as printed on the plug. Use bulbs marked dimmable so the dimmer holds a steady level near the bottom of its range.
How do I add or reset the LAMP-ZW2?
Scan the Z-Wave QR code on the back and plug it in; it joins within ten minutes. Or set the controller to add and press the button three times. Factory reset: two quick presses, then hold the third 10 seconds.
How far does the LAMP-ZW2 reach on Long Range?
Up to 1300 ft direct to the controller on Long Range and 330 ft (100 m) per hop on classic mesh. Long Range needs an 800 Series controller with Long Range enabled and a SmartStart join.
Does it work with my existing Z-Wave controller?
It works with any Z-Wave certified controller. Versa lists Alarm.com, 2GIG EDGE, Qolsys IQ, SmartThings, Hubitat and Home Assistant. Older and newer Z-Wave devices work together on one network.
Can I lock out the button for a rental or commercial job?
Yes. Parameter 16 sets what can control the plug: hub only, button and hub together (default), or neither. Parameter 17 blocks programming from the button.
Does it remember its state after a power cut?
Yes. By default it returns to its previous state after power returns. This is parameter 8, and it can be changed from the hub.
Can the LAMP-ZW2 be used outdoors or with a heater?
No. It is for indoor, dry locations only, on a grounded outlet. Do not use it with electric heaters, heat lamps, sun lamps, medical equipment or anything hazardous if it switches on unattended.
All Intrusion