• SS&Si
  • Kidde Commercial
  • Kidde | Genesis Ceiling Mass Notification Strobe, White Housing, Green Lens, ALERT Marking, Selectable Candela | GCVWA-G

You save

Kidde | Genesis Ceiling Mass Notification Strobe, White Housing, Green Lens, ALERT Marking, Selectable Candela | GCVWA-G

Kidde | Genesis Ceiling Mass Notification Strobe, White Housing, Green Lens, ALERT Marking, Selectable Candela | GCVWA-G

No reviews yet Write a Review
SKU:
KD-GCVWA-G

The Kidde Genesis GCVWA-G is a ceiling-mount strobe built for mass notification and emergency communication systems. White housing with a green lens and red ALERT marking, it delivers a visual signal that's immediately distinct from fire alarm notification - exactly what a facility needs when running both fire and mass notification on the same infrastructure.

Built for the commercial installer

At just 1.6 inches from the ceiling, the Genesis profile stays out of the way while meeting UL 1971 and UL 1638 light distribution requirements with FullLight strobe technology. Mounts flush to any standard North American 4-inch square electrical box (2-1/8" deep) with no extension ring or trim plate. Twist-open design gives access to the mounting screws and field-selectable candela switch, then locks in place with no visible hardware. Screw terminals accept #18 to #12 AWG for long runs or existing wiring.

Key features

  • Green lens with ALERT marking: provides distinct visual notification for mass notification, separate from fire alarm signaling on the same system
  • Selectable candela output: four field-configurable settings (A, B, C, D) adjustable at the device without removal
  • Low-profile ceiling mount: protrudes just 1.6" (41 mm) from the ceiling
  • Standard 4" box mounting: flush-mounts to North American 4" square electrical box, 2-1/8" deep, no extension ring required
  • FullLight strobe technology: smooth, even light distribution across the coverage area with no specular hot spots
  • Synchronization-ready: exceeds UL 1971 sync requirements when paired with a compatible source (G1M-RM, SIGA-CC series, BPS/APS panels)

System requirements

Connects to a Notification Appliance Circuit (NAC) from the FACP or auxiliary power supply. Operates on regulated 16-33 VDC or unfiltered 16-33 VFWR. For synchronized flash patterns across multiple devices, add a compatible sync source such as the G1M-RM, SIGA-CC1S, or BPS/APS series power supply.

Brand:
Kidde Commercial
Form factor:
Ceiling-mount strobe, 6.8" dia x 1.0" H (173 x 25 mm)
Housing:
White, textured UV-stabilized engineered plastic, UL 94V-0 flammability rated
Lens color:
Green, optical grade polycarbonate (special order)
Marking:
ALERT (red text on white housing)
Candela output:
Selectable, 4 settings (A, B, C, D)
Operating voltage:
Regulated 16-33 VDC or unfiltered 16-33 VFWR
Wire connections:
Screw terminals, #18 to #12 AWG (0.75-2.5 mmĀ²)
Mounting:
Flush to standard 4" square electrical box, 2-1/8" (54 mm) deep, no extension ring required
Ceiling protrusion:
1.6" (41 mm)
Operating temp:
32Ā°F to 120Ā°F (0Ā°C to 49Ā°C)
Operating humidity:
0-93% relative humidity, non-condensing
Environment:
Indoor use only
Compliance:
UL 1971, UL 1638, CAN/ULC S526-02, CAN/ULC S524-01, ADA (28 CFR Part 36), CSFM, MEA
Synchronization:
UL 1971 compliant, max 20 Ohm resistance between devices. Sources: SIGA-CC1S, SIGA-MCC1S, SIGA-CC2A, SIGA-MCC2A, G1M-RM, BPS6A, BPS10A, APS6A, APS10A, iO Series, Fireshield Plus
Weight:
1.8 lb (0.82 kg)
What's the difference between this and a standard fire alarm ceiling strobe?
The GCVWA-G is an ECS/MNS mass notification appliance. The green lens and ALERT marking distinguish it from fire alarm strobes (clear lenses, FIRE markings), so facilities can run both notification types on one system.
How do I change the candela output setting?
Twist open the strobe (no tools required), slide the candela switch to the desired A, B, C, or D setting, then close. The selected setting stays visible through a small window on the front of the device after installation.
Does this mount on standard electrical boxes?
Yes. Flush-mounts to any standard North American 4-inch square electrical box, 2-1/8 inches deep. No extension ring, trim plate, or proprietary back box required.
What synchronization sources are compatible?
Compatible with SIGA-CC1S, SIGA-MCC1S, SIGA-CC2A, SIGA-MCC2A, G1M-RM, BPS6A, BPS10A, APS6A, APS10A, iO Series, and Fireshield Plus 3/5/10 zone panels. Maximum allowed resistance between any two devices on a synchronized circuit is 20 Ohms.
Is this rated for outdoor use?
No. All Genesis ceiling strobes are rated for indoor use only, operating between 32-120Ā°F (0-49Ā°C) and 0-93% relative humidity. For outdoor mass notification, consider the Genesis Outdoor series.

Spec Sheet

Download File

Related Products