Kidde | Genesis LED G4SE Wall-Mount Strobe Expander, White with Amber Lens | G4SEWN-A

p The Genesis LED G4SE Strobe Expander adds a second, independently controlled strobe behind any Genesis LED EG4 or EG4S wall-mount appliance. One electrical box, two strobes, two separate NAC circuits. For jobs that need visible notification in more than one alert pattern from a single mounting location, the G4SE eliminates a second box cut and a second wire run. /p h2 Built for the commercial fire installer /h2 p The G4SE mounts flush on a standard North American 4-inch square electrical box (minimum 1 " deep) with the host Genesis appliance stacking directly in front of it. No extension rings, no trim plates, no special hardware. Indoor dry locations, 32-120F operating range. UL Listed (S5389) and FCC Certified. /p p Ultra-low LED current draw means more devices per NAC circuit before hitting panel limits. The G4SE synchronizes with other Genesis strobes on the same circuit and meets UL synchronization requirements when paired with Kidde CC Series signal modules, booster power supplies, auxiliary power supplies, or intelligent and conventional control panels. /p h3 Key features /h3 ul li strong Independent second strobe: /strong adds a separately controlled amber strobe behind a Genesis EG4 or EG4S host appliance /li li strong Single-box installation: /strong mounts on the same 4" square box as the host, no additional wall penetration /li li strong Ultra-low current draw: /strong LED technology maximizes NAC circuit device count /li li strong Full Genesis synchronization: /strong syncs with other Genesis strobes via Kidde CC Series modules, booster/auxiliary supplies, or compatible FACPs /li li strong 75 cd amber output: /strong meets UL 1971 requirements at 1 flash per second /li li strong Wide voltage range: /strong operates on 16-33 VDC or 16-33 VFWR /li /ul h3 System requirements /h3 p Requires a Genesis LED EG4 or EG4S series wall-mount appliance as the host device and a standard 4-inch square electrical box at least 1 " deep. Wire with 12-18 AWG. The G4SE connects to a separate NAC circuit from the host appliance for independent control. /p