Omada 24-Port 2.5G L2+ Managed Switch with 4 x 10G SFP+ Slots, 200 Gbps, Rackmount
SKU TPL-SG3428X-M2 Model SG3428X-M2
- 24 2.5G RJ45 ports and 4 10G SFP+ slots in a 1U rackmount case
- 200 Gbps of switching capacity and a 32K-entry MAC address table
- L2+ static routing, VLANs, ACLs, 802.1X and ERPS ring recovery
- Managed in Omada with zero-touch provisioning, or standalone by web UI and CLI
- Fast shipping from four branches
- 30-day returns on unopened products
Product highlights
- Ports24 x 2.5G, 4 x 10G SFP+
- ConnectivityL2+ managed, cloud or standalone
- Power37.9 W max, 1 fan
- Mount19-inch rack
- Size17.3 x 7.1 x 1.7 in
The Omada SG3428X-M2 is a 24-port 2.5G L2+ managed switch with four 10G SFP+ slots, built to aggregate a floor of multi-gig Wi-Fi access points and hand the traffic upstream at 10G. It manages in the same Omada site as the gateway and APs.
Built for multi-gig aggregation
Twenty-four 2.5G RJ45 ports run over existing Cat5e, and four SFP+ slots carry 10G uplinks. 200 Gbps of switching capacity and a 32K MAC table keep a full rack of multi-gig devices moving. Static routing, 802.1Q VLANs, ACLs, 802.1X and IGMP snooping cover segmented networks. The switch has one fan, typically 20.0 dBA at 1 m, and mounts in a 19-inch rack.
Key features
- 24 2.5G RJ45 ports and four 10G SFP+ slots for multi-gig access with 10G uplinks
- 200 Gbps switching capacity with a 32K MAC address table
- 1U rackmount case with a single fan and rackmount kit included
- L2+ features: static routing, DHCP server, VLANs, ACLs and ERPS ring recovery
- Zero-touch provisioning and batch firmware upgrades through the Omada Cloud-Based Controller
System requirements
Centralized management needs an Omada Cloud-Based Controller (firmware 5.15.22 or later), Omada hardware controller or Omada Software Controller (5.15.20 or later); zero-touch provisioning needs the cloud controller. Without a controller the switch runs standalone from its own web interface and CLI.
Specifications
| SKU | TPL-SG3428X-M2 |
|---|---|
| Brand | TP-Link |
| Form factor | 28-port 2.5G L2+ managed switch with 10G SFP+ uplinks, rackmount |
| Communication | Ethernet / IP |
| Power input | 100-240V AC, 50/60 Hz |
| Power consumption | 37.9 W max at 220V, 37.7 W max at 110V |
| Management | L2+ Managed |
| Port speed | 2.5G |
| Port speed | 10G |
| Works with | Omada |
| Ethernet ports | 24 x 2.5G RJ45 |
| SFP slots | 4 x 10G SFP+ |
| Console ports | 1 x RJ45, 1 x Micro-USB |
| Switching capacity | 200 Gbps |
| Packet forwarding rate | 148.80 Mpps |
| MAC address table | 32K |
| Jumbo frame | 9 KB |
| VLANs | 4K 802.1Q VLANs, MAC, protocol and voice VLAN, VLAN mapping and replace |
| L2+ features | 48 IPv4/IPv6 static routes, DHCP server and relay, link aggregation, STP, ERPS, loopback detection |
| Security | 802.1X, RADIUS and TACACS+ AAA, ACLs, DHCP snooping, ARP inspection, port security, storm control |
| Controller management | Omada Cloud-Based (v5.15.22+), hardware or Software Controller (v5.15.20+); Omada app |
| Communication notes | Web GUI, CLI via console and Telnet, SNMP v1/v2c/v3, RMON, LLDP, sFlow, IPv6 |
| Cooling | 1 fan; typical 20.0 dBA at 1 m (100% load, 77°F/25°C) |
| Mounting | 19-inch rack (rackmount kit and rubber feet included) |
| Dimensions | 17.3 x 7.1 x 1.7 in (440 x 180 x 44 mm) |
| Operating temp | 23°F to 113°F (-5°C to 45°C) |
| Operating humidity | 10 to 90% RH, non-condensing |
| Compliance | FCC, CE |
| Package contents | SG3428X-M2, power cord, RJ45 console cable, installation guide, rackmount kit, rubber feet, screws |
